UV Curing Device

Promed UVL-36S white – the compact UV curing lamp for at-home nail designThe Promed UVL-36S white is a compact UV curing lamp using classic tube technology (UV fluorescent tubes, 365 nm) – ideal for at-home nail design and hobby use. In a stylish white design, with 36 W rated power and four pre-programmed timers for curing UV gel and acrylic. The practical way into UV light curing – for the studio and at home. Your benefits at a glance Compact design: Space-saving in your home studio. Stylish white design: Modern and neutral. Four fixed timers: 90 seconds and 120 seconds for individual layers, 30 and 60 minutes for long cycles. Classic UV tube technology: 36 W rated power, 365 nm wavelength – cures classic UV gel and acrylic reliably. Pull-out hand rest: for comfortably resting your hand during curing. Ideal entry point: Just as suitable for professionals in the studio as for home and hobby use. Areas of application At-home nail design: Your own nail art and nail extensions, comfortably at home. Hobby use: Occasional UV curing of gel and acrylic. Studio starter: An economical entry point for professionals in nail technology and nail design. Initial equipment: Getting started with classic UV light curing (365 nm). How easy it is to use Step 1 – First use: Pull the hand rest out of the guide rail, remove both transport locks, check that the tubes are seated correctly and reinsert the hand rest. Then plug in the mains cable (220–240 V). Step 2 – Switching on: Press the on/off button – the power LED lights up red. Step 3 – Selecting the timer: Set the operating time on the time selector switch (90 s / 120 s / 30 min / 60 min) – the timer starts automatically. Step 4 – Curing: Place the hand with the prepared gel nail inside and wait for the cycle to finish. After use, switch off, unplug the mains cable and only touch the tubes once they have cooled down. Technical data Model / article numberPromed UVL-36S white (330040) / pink (330045) Device typeUV curing lamp (UV fluorescent tubes) Rated power36 W Wavelength365 nm (UV, type I) Lamp socketG23 Timers90 s / 120 s / 30 min / 60 min (pre-programmed) Dimensions255 × 230 × 110 mm; tunnel opening 176 × 140 × 85 mm Weight0.93 kg Protection ratingIP 20, protection class II Hand restpull-out Colour variantswhite (330040) / pink (330045) Power supply220–240 V, 50/60 Hz (mains cable, no adapter) Warranty24-month manufacturer's warranty Scope of delivery 1× Promed UVL-36S (UV tubes pre-installed), housing colour white (330040) or pink (330045) 1× pull-out hand rest (already fitted in the device, incl. transport locks) 1× instruction manual Care and safety information UV radiation can damage the eyes and skin – protective goggles are strongly recommended, never look into the tubes. People with UV sensitivity, skin conditions or taking photosensitising medication should avoid UV exposure or seek medical advice beforehand. Keep a minimum distance of 20 mm from the tube; do not touch hot tubes (risk of burns). Maximum 10 minutes of exposure per session, followed by at least a 30-minute break; no more than approx. 200 applications per year. Cleaning: Clean the housing only with a slightly damp cloth, keep the ventilation slots clear. Operate only on a 220–240 V socket; do not use in a damp environment. Use only original replacement tubes (type UV-9W-L). Frequently asked questions (FAQ)What is the difference between the UVL-36S and the UVL-54 All-In?The UVL-36S uses classic UV tube technology (365 nm) and reliably cures classic UV gels and acrylic. The UVL-54 All-In is the LED-based alternative, which additionally cures LED-optimised gels.Which gels can I cure with it?Classic UV gels (365 nm) and acrylic. Products that are specifically LED-optimised may not cure fully with pure UV tube technology.What are the 30- and 60-minute timers for?For long curing or drying cycles. Individual gel layers usually only need 90 to 120 seconds.Which replacement tubes fit the device?Exclusively original replacement tubes of type UV-9W-L (365 nm, G23 socket), available individually or as a set of 4.Why does the hand rest stick on a new device?On first use, the transport locks on the hand rest must be removed first. After that, it can be pulled out and reinserted normally.Is eye protection necessary?Yes. UV radiation can damage the eyes and skin – protective goggles are strongly recommended, and you should never look directly into the tubes.What warranty do I get?A 24-month manufacturer's warranty from the date of purchase. Why Promed?For over 40 years, Promed has stood for high-quality products for manicure and pedicure as well as medical and wellness applications. Our devices are developed to strict quality standards, are tested and certified and used all over the world. Order the Promed UVL-36S now – the practical way into classic UV light curing.

Promed UVL-54 ALL-IN – UV LED Curing Lamp for Fingernails and Toenails with 36 LEDsThe Promed UVL-54 ALL-IN is a professional UV LED curing lamp for gel and acrylic on fingernails and toenails. With 36 high-definition LEDs in a dual-power system, 4 timer settings, an anti-heat function and an automatic sensor system, it is the ideal solution for nail salons and ambitious home nail artists. A removable magnetic base plate makes it comfortable to use for pedicures. Your benefits at a glance 36 high-definition LEDs in a dual-power system: Even, reliable curing of gel and acrylic – with no shadows or under-cured spots. 4 timer settings (10 s / 30 s / 60 s / 99 s): Perfectly matched to all common gel types. Anti-heat function (99 s timer): Gentle curing without heat spikes – especially comfortable for the client. Removable magnetic base plate: Switch quickly between manicure and pedicure – simply remove it for toenails. Automatic sensor system: An integrated light barrier switches the device on and off automatically as soon as the hand or foot is inside the tunnel. Durable LED technology: Low-maintenance – no bulb changes as with conventional UV lamps. Clear digital display: Timer and status readable at a glance. Slim, elegant tunnel: Space-saving on the salon table or at home. Areas of use – who is the UVL-54 suitable for? Professional nail salons: Daily curing of gel/acrylic nail extensions on fingernails and toenails. Mobile nail artists: Compact design – easy to transport. Self-employed nail technicians: A solid professional device at an attractive price-performance ratio. Ambitious home nail artists: Salon-quality results for your own nail modelling at home. Using it is this easy Step 1 – Preparation: Plug the device into the mains socket. For a manicure: leave the base plate in place. For a pedicure: remove the magnetic base plate so the toenails fit neatly into the tunnel. Step 2 – Select the timer: Choose the timer setting to match the gel type (10 s / 30 s / 60 s / 99 s). For a very sensitive client, use the anti-heat function (99 s). Step 3 – Curing: Slide the hand or foot into the tunnel – the light barrier starts the timer automatically. Start manually if required. Step 4 – Done: Once the timer runs out, the device switches off automatically. The nail is cured and ready for the next modelling step. Technical data Model / item numberPromed UVL-54 ALL-IN (223005) Device typeUV LED curing lamp Number of LEDs36 (Dual Power System) Wavelength365–405 nm Timer settings10 s / 30 s / 60 s / 99 s Sensor systemAutomatic (on/off via light barrier) Output power54 W; low-power mode 48 W (switchable) Anti-heat / painless functionYes – power builds up gradually (99 s timer) Base plateremovable (magnetic) Power supply100–240 V AC, 50/60 Hz Warranty24-month manufacturer's warranty Scope of delivery 1× Promed UVL-54 All-In UV LED curing lamp 1× mains adapter (100–240 VAC) 1× instruction manual Care and safety instructionsPlease read the instruction manual carefully before first use. Do not look directly into the LEDs: Even though UV LEDs are gentler on the skin than conventional UV bulbs, neither you nor your client should look directly into the LEDs. When taking photosensitising medication or if you have light-sensitive skin, consult a doctor before use. Cleaning: Clean the housing and tunnel with a slightly damp cloth – do not bring it into direct contact with water. Magnetic base plate: When switching between manicure and pedicure, remove it carefully; do not force it off. Keep the ventilation slots clear and ensure sufficient air circulation. Operate only with the original power supply. Frequently asked questions (FAQ) Which gel types is the UVL-54 compatible with? With its wavelength range of 365–405 nm, the UVL-54 covers the entire common spectrum for nail gels and acrylics. It reliably cures UV gels, LED gels and acrylic gels alike. For the optimum curing time, follow the recommendation of the respective gel manufacturer. Which timer setting is the right one? The optimum curing time depends on the gel type: thin gel layers (base coat) typically need 10–30 s, normal modelling layers 30–60 s, and thick layers or acrylic 60–99 s. For a very sensitive client we recommend the 99 s anti-heat timer – a longer curing time with reduced heat. What is the anti-heat function? The anti-heat function cures the gel over a longer period (99 s) at reduced LED intensity. This minimises heat build-up – ideal for sensitive clients or thin natural nail plates. The noticeable burning sensation many people know from UV lamps is avoided. Can I use the UVL-54 for pedicures too? Yes. The magnetic base plate is easy to remove so that a foot fits comfortably into the tunnel as well. This makes the UVL-54 a true "all-in" device for both hand and foot modelling. How does the automatic sensor function work? An integrated light barrier detects when the hand or foot is slid into the tunnel and automatically starts the set timer. As soon as the tunnel is empty again, the device switches off. You can also start the timer manually. How durable is the LED technology? The high-quality LEDs are low-maintenance and long-lasting – with no bulb changes as required by conventional UV lamps. Designed for daily salon use. Is the UVL-54 suitable for people with allergies or pregnant women? The UV exposure from LED curing lamps is considerably lower than from conventional UV bulb lamps. However, if you are taking photosensitising medication, have light-sensitive skin or are pregnant, we recommend consulting a doctor before use. What warranty does Promed offer on the UVL-54? Promed provides a manufacturer's warranty of 24 months from the date of purchase. All Promed devices are developed to strict quality standards and tested before delivery. Why Promed?For over 40 years, Promed has stood for high-quality products for manicure and pedicure as well as medical and wellness applications. Our devices are developed to strict quality standards, are tested and certified and are used worldwide by professionals and private customers alike. Order the Promed UVL-54 ALL-IN now and enjoy even, gentle curing of gel and acrylic – for manicures and pedicures in salon quality.

Promed UVL-60-X – the powerful LED-UV curing lamp with battery – cordless or mains-poweredThe Promed UVL-60-X is a powerful LED-UV curing lamp for gel, acrylic and TPO-free polishes on finger- and toenails. With its integrated 5,200 mAh battery it runs cordless – mains operation is always available too. 42 extra-large high-performance LEDs (365–405 nm) with gold contacts and mirror reflectors ensure reliable, fast curing. Auto-start via infrared sensors, 4 timer settings plus a high-power and a low-heat mode. Your benefits at a glance Cordless curing: Integrated 5,200 mAh battery – work anywhere, mains operation always available. Maximum light output: 42 extra-large high-performance LEDs (365–405 nm) with gold contacts and mirror reflectors. For modern systems: Cures gel, acrylic and TPO-free polishes. Gentle or fast: High-power and low-heat modes, timer 10/30/60/90 s. Automatic sensor: Infrared sensors start curing automatically. Pedicure-ready: Removable magnetic base plate, sturdy carrying handle, mountable under the table. Areas of application Curing gel, acrylic and TPO-free polishes: On finger- and toenails. Cordless working: Thanks to the battery, even where no power socket is within reach. Manicure and pedicure: Magnetic base plate removable for toenail application. Using it is this easy Step 1 – Preparation: Before first use, charge the battery fully for at least 3 hours (only with the supplied power adapter). Step 2 – Switch on: Turn on the device; the display shows timer, battery level and mode. Step 3 – Curing: Insert your hand – auto-start via sensor, or select the timer (10/30/60/90 s) via button/touch. Low-heat mode for heat sensitivity, high power for fast curing. Step 4 – Pedicure: For toenails, remove the magnetic base plate. Technical data Model / Article numberPromed UVL 60-X (223000) Device typeLED-UV curing lamp with battery LEDs42 high-performance LEDs, extra-large chips; gold contacts; mirror reflectors Wavelength365–405 nm Power36 W BatteryLi-Ion 5,200 mAh, permanently integrated; initial charge at least 3 h, then 1–3 h Timer10 s / 30 s / 60 s / 90 s ModesHigh Power / Low Heat Sensor systemAutomatic (infrared sensors) Base platemagnetic, removable (pedicure) Power adapterInput 100–240 V, 50/60 Hz; output 12.6 V DC / 2.8 A / 36 W Dimensions / Weightapprox. 250 × 200 × 90 mm / approx. 1,240 g Warranty24-month manufacturer's warranty Scope of delivery 1× Promed UVL 60-X LED-UV curing lamp 1× removable magnetic base plate 1× power cable/power adapter 1× instruction manual Care and safety instructionsPlease read the instruction manual carefully before first use. Do not look directly into the switched-on LEDs. If you have photosensitive skin/photosensitivity or take photosensitising medication, seek medical advice before use. Do not remove the battery: The battery is permanently integrated – do not open or dismantle the battery compartment. Operate only with the supplied power adapter (12.6 V / 2.8 A). Cleaning: Clean the housing and tunnel with a slightly damp cloth. Keep the ventilation slots clear, ensure adequate air circulation. If not used for a long time: Switch the device off and recharge the battery every 3 months (deep-discharge protection). Do not use in a damp environment (protection rating IP20); keep away from children. Frequently asked questions (FAQ)What sets the UVL 60-X apart from the UVL-54 All-In?The UVL 60-X (art. 223000) has an integrated 5,200 mAh battery for cordless working and 42 extra-large high-performance LEDs with high-power and low-heat modes. The UVL-54 All-In (art. 223005) runs via power adapter, has 36 LEDs and likewise a magnetically removable base plate.Which materials does the lamp cure?The UVL 60-X cures gel, acrylic and TPO-free polishes. The wavelength range is 365–405 nm. For the optimal curing time, follow the recommendation of the respective gel manufacturer.What does the low-heat mode do?The low-heat mode reduces the sensation of heat during curing – pleasant for sensitive nails. For fast curing, the high-power mode is available.How long does the battery last?The integrated battery has a capacity of 5,200 mAh. The initial charge takes at least 3 hours, subsequent charges 1–3 hours. For longer storage we recommend recharging the battery every 3 months to prevent deep discharge.Can I also use the UVL 60-X for pedicures?Yes – the magnetic base plate can be removed so that toenails also fit comfortably into the light tunnel. The device can also be mounted under the table.Why does the lamp also cure TPO-free polishes?The 42 high-performance LEDs in the wavelength range 365–405 nm cover the spectrum that TPO-free (photoinitiator-free) nail polishes also need for curing – relevant, since classic TPO-containing products are increasingly restricted in the EU.What warranty does Promed offer on the UVL 60-X?Promed grants a manufacturer's warranty of 24 months from the date of purchase. All Promed devices are developed to strict quality standards and tested before dispatch. Why Promed?For over 40 years, Promed has stood for high-quality products for manicure and pedicure as well as medical and wellness applications. Our devices are developed to strict quality standards, are tested and certified, and are used worldwide by professionals and private customers alike. Order the Promed UVL 60-X now – powerful LED-UV curing with battery, cordless or mains-powered.