These high quality bits from titanium-carbit-alloy with gold coating heats up less fast and are more pleasant therefore in application for your customers.Special Featuresspecial grinder for both running directionsfast removal of the modeling (gel and acrylic)special coating avoid heat developmentvery fine structure on the nails imageextrem durableRotational speed: up to 25.000 rpm.

Promed Titanium Bit (Gold Tip), Cylinder, Short Shank – Professional Bit for Gel and AcrylicThe Promed Titanium Bit with gold tip in cylinder shape (also known as Carbide-Titanium drill bit) is a high-quality professional bit for nail enhancement. The special titanium-carbide alloy with gold coating ensures minimal heat development – pleasant for you and your clients, even during intensive sessions. Ideal for matting tips, shortening artificial nails and fast material removal of gel and acrylic. Key Benefits at a Glance Gold-coated titanium-carbide alloy: Develops noticeably less heat than standard bits – significantly more pleasant for the client during treatment. Cylinder shape with short shank: Excellent control during fine work on tips, modeling and transitions. Fast material removal: Efficient on gel, acrylic and acrylic gel – saves time during new modeling and refills. Very durable: The high-quality carbide tooth pattern with gold coating stays sharp considerably longer than uncoated tungsten-carbide (HM) bits. Speed up to 25,000 RPM: Optimally matched to Promed professional nail drills. Compatible with all Promed pro nail drills: Perfect fit for Promed 4030 S, 4030 SX, 4030 SX2 and 4040 thanks to standardised shank diameter (approx. 2.35 mm). Applications – Who Is This Bit For?The Promed Titanium Bit was developed for professional nail enhancement. Particularly recommended for: Professional nail salons and nail technicians: Daily work on artificial nails – matting tips, shortening, modeling corrections. Self-employed nail designers: Mobile use thanks to the short shank – also ideal in the salon when working in tight spaces. Refill work: Quick, precise removal of gel and acrylic during refills. Advanced home nail designers: If you do your own nail enhancement and want professional quality. Typical Applications Step 1 – Insert the bit: Place the bit into the collet of your Promed 4030 S, 4030 SX, 4030 SX2 or 4040, lock firmly and check the seat. Step 2 – Choose your speed: Start at lower RPM with modeling material (5,000–10,000 RPM) and increase up to a maximum of 25,000 RPM as needed. Step 3 – Work: Glide over the modeling with light pressure and even guidance – never stay too long in one spot to avoid local heat build-up. Step 4 – Cleaning & storage: After use, remove material residue with a soft brush or compressed air, disinfect, then store dry in the bit holder. Technical Specifications Model / Item NumberPromed Titanium Bit (Gold Tip), Cylinder, Short Shank (198551) ShapeCylinder Shank lengthShort Shank diameterapprox. 2.35 mm (standard) MaterialTitanium-carbide alloy with gold coating (gold tip) Max. speed25,000 RPM Recommended materialsGel, acrylic, acrylic gel, artificial nails CompatibilityPromed 4030 S, 4030 SX, 4030 SX2, 4040 and other Promed pro nail drills with 2.35 mm collet PropertiesLow heat development, durable, precise tooth pattern What's Included 1× Promed Titanium Bit (Gold Tip), Cylinder, Short Shank (Item 198551) Care & Safety NotesPlease read the user manual of your Promed nail drill carefully before first use. Cleaning after each use: Remove material residue with a soft brush, bit cleaning brush or compressed air. Disinfection: Disinfect the bit after each client (e.g. with instrument disinfectant) – essential in professional salons for hygiene reasons. Storage: Store bits dry in a bit stand – never loose in a drawer, this damages the tooth pattern. Don't overheat the bit: Never work too long in one spot – this damages both the modeling and the bit. Replace when worn: Once the bit removes material noticeably more slowly or the gold coating shows visible wear, time for a new bit. Frequently Asked Questions (FAQ) Which Promed devices is this bit compatible with? The bit fits all Promed pro nail drills with the standardised 2.35 mm collet – in particular Promed 4030 S, 4030 SX, 4030 SX2 and the new Promed 4040. If in doubt, please check the shank diameter of your device in the user manual. What's the difference between titanium bits and tungsten-carbide (HM) bits? Both bit types work for gel and acrylic. Titanium bits with gold coating develop considerably less heat and are considered premium – more pleasant for the client and longer-lasting than uncoated HM bits. HM bits are typically more affordable and a great all-rounder for daily work. Many professionals combine both depending on the task. Which speed is the right one? Always start at a lower speed (about 5,000–10,000 RPM) and slowly find the optimal setting. The maximum speed of 25,000 RPM should only be used briefly and on harder materials. Higher RPMs increase heat development – uncomfortable for the client and can damage the modeling. How long does a titanium bit (gold tip) last? Lifespan strongly depends on your work routine and cleaning. Promed titanium bits with gold coating are generally considered very durable – with proper use and regular care, significantly longer than uncoated HM bits. Replace the bit once the gold coating is visibly worn or the material removal noticeably slows down. How do I clean the bit correctly? After each use remove material residue with a bit cleaning brush or compressed air – never scrape with hard tools. In a professional salon, disinfection after each client is required (instrument disinfectant). Then store dry in a bit stand. Is this bit suitable for left-handed users? This cylinder shape uses standard tooth pattern designed for the normal rotation direction. For left-handed users or counter-rotation applications we recommend the specifically adapted Promed HM Bit, Left-handed, Cone, Cross-cut, medium (Item 198423) – with reversed tooth pattern for fast material removal in counter-rotation. What other Promed titanium and carbide bits are available? In the same premium quality Promed offers: Titanium Bit, Cylinder, Long Shank (Gold Tip) (Item 198551/L) for greater reach in hard-to-access areas, Titanium Bit, Cylinder, Rounded (Gold Tip) (Item 198556) for softer transitions and contours, and Carbide Bit, Cylinder, Cross-cut (Item 198557) for especially efficient material removal. Is this bit suitable for natural nails or callus? No. The titanium bit is specifically designed for working on artificial nails (gel, acrylic, acrylic gel). For natural nails we recommend sapphire bits, for callus treatment sapphire or ceramic bits from the Promed range. Why Promed?For more than 40 years Promed has stood for high-quality products in manicure and pedicure as well as medical and wellness applications. Our devices and grinding accessories are developed to strict quality standards, are tested and certified, and are used by professionals and private customers worldwide – trust Promed quality, too. Order your Promed Titanium Bit now and work faster, cleaner and more gently on your nail enhancements – with premium-quality professional bits.

 These high quality bits from titanium-carbit-alloy with gold coating heats up less fast and are more pleasant therefore in application for your customers.Special Featurestip blending to the natural naildulling the tips, shortening of artificial nailsyou can file the nails thinner on the hem at the nailfor removal of gel and acrylic; extrem durableRotational speed: up to 25.000 rpm.