Sapphire Bits

Promed Sapphire Callus Grinder Fine (190066) – for smoothing fine finishing The Promed callus grinder in a fine grit with a natural sapphire coating smooths the skin after callus removal and ensures a well-cared-for, soft result. The fine grit is ideal for the final fine finishing. Fits all Promed nail drills with a 2.35 mm collet. Key features at a glance Material: sapphire (natural corundum). Grit: fine – for smoothing fine finishing. Application: skin/calluses on the feet. Shank: dental standard Ø 2.332–2.350 mm, for all Promed devices with a standard collet. Recommended speed: up to 20,000 rpm. Cleaning: autoclavable (121–134 °C) or in an ultrasonic bath. What is it used for and how? Fine finishing: smooth and refine the skin after coarser removal. Well-cared-for finish: for soft, even skin on the feet. Tip: work with light pressure and even movement; pause briefly if it gets warm. Technical data Article number190066 TypeCallus grinder, fine (sapphire) MaterialSapphire (natural corundum) Gritfine Application areaSkin/calluses ShankØ 2.332–2.350 mm (dental standard) Recommended speedup to 20,000 rpm Sterilisationautoclavable (121–134 °C) or ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesFits all Promed nail drills with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, autoclave (121–134 °C) or clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60). Never remove calluses too aggressively; work with light pressure. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) When to use fine, when coarse? The fine grit is for the final fine finishing and smoothing of the skin; use a coarser grit for the intensive first removal. Can I autoclave the bit? Yes. This callus grinder is autoclavable (121–134 °C); alternatively, clean it in an ultrasonic bath. With the fine Promed sapphire callus grinder, you can smooth the skin for a well-cared-for finish.

Promed Sapphire Callus Grinder Coarse (190063) – for pronounced calluses The Promed callus grinder in a coarse grit with a natural sapphire coating removes pronounced calluses and hard skin on the feet quickly and over a wide area. The coarse grit is ideal for the first, more intensive treatment. Fits all Promed nail drills with a 2.35 mm collet. Key features at a glance Material: sapphire (natural corundum). Grit: coarse – for intensive callus removal. Application: skin/calluses on the feet. Shank: dental standard Ø 2.332–2.350 mm, for all Promed devices with a standard collet. Recommended speed: up to 20,000 rpm. Cleaning: in an ultrasonic bath. What is it used for and how? Pronounced calluses: remove over a wide area in thin layers – for the first, coarser working step. Fine finishing afterwards: then smooth with a finer grit. Tip: never remove too much at once; work with light pressure and on a regular basis. Technical data Article number190063 TypeCallus grinder, coarse (sapphire) MaterialSapphire (natural corundum) Gritcoarse Application areaSkin/calluses ShankØ 2.332–2.350 mm (dental standard) Recommended speedup to 20,000 rpm Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesFits all Promed nail drills with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions Clean after use in an ultrasonic bath (e.g. Promed UC-50 / UC-60). Never remove calluses too aggressively; work with light pressure. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) When to use coarse, when fine? The coarse grit is for the intensive first removal of pronounced calluses; use a finer grit for the subsequent fine finishing. Which devices does it fit? All Promed nail drills with a standard collet (shank Ø 2.35 mm). With the coarse Promed sapphire callus grinder, you can remove pronounced calluses quickly and safely.

Promed Sapphire Callus Grinder Coarse (190067) – for pronounced calluses The Promed callus grinder in a coarse grit with a natural sapphire coating removes pronounced calluses and hard skin on the feet quickly and over a wide area. The coarse grit is ideal for the first, more intensive treatment. Fits all Promed nail drills with a 2.35 mm collet. Key features at a glance Material: sapphire (natural corundum). Grit: coarse – for intensive callus removal. Application: skin/calluses on the feet. Shank: dental standard Ø 2.332–2.350 mm, for all Promed devices with a standard collet. Recommended speed: up to 20,000 rpm. Cleaning: in an ultrasonic bath; not autoclavable. What is it used for and how? Pronounced calluses: remove over a wide area in thin layers – for the first, coarser working step. Fine finishing afterwards: then smooth with a finer grit. Tip: never remove too much at once; work with light pressure and on a regular basis. Technical data Article number190067 TypeCallus grinder, coarse (sapphire) MaterialSapphire (natural corundum) Gritcoarse Application areaSkin/calluses ShankØ 2.332–2.350 mm (dental standard) Recommended speedup to 20,000 rpm Sterilisationnot autoclavable; ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesFits all Promed nail drills with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions Clean after use in an ultrasonic bath (e.g. Promed UC-50 / UC-60); do not autoclave. Never remove calluses too aggressively; work with light pressure. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) When to use coarse, when fine? The coarse grit is for the intensive first removal of pronounced calluses; use a finer grit for the subsequent fine finishing. Can I autoclave the bit? No. This callus grinder is not autoclavable – clean it in an ultrasonic bath. With the coarse Promed sapphire callus grinder, you can remove pronounced calluses quickly and safely.

Promed Sapphire Callus Grinder Medium (190064) – for quick callus treatment The Promed callus grinder in a medium grit with a natural sapphire coating removes calluses and hard skin on the feet evenly. The medium grit is the all-rounder between intensive removal and fine finishing. Fits all Promed nail drills with a 2.35 mm collet. Key features at a glance Material: sapphire (natural corundum). Grit: medium – the all-rounder for callus treatment. Application: skin/calluses on the feet. Shank: dental standard Ø 2.332–2.350 mm, for all Promed devices with a standard collet. Recommended speed: up to 20,000 rpm. Cleaning: autoclavable (121–134 °C) or in an ultrasonic bath. What is it used for and how? Calluses: remove evenly and in thin layers – ideal for regular care. After coarse removal: as the intermediate step before the final fine finishing. Tip: never remove too much at once; work with light pressure and on a regular basis. Technical data Article number190064 TypeCallus grinder, medium (sapphire) MaterialSapphire (natural corundum) Gritmedium Application areaSkin/calluses ShankØ 2.332–2.350 mm (dental standard) Recommended speedup to 20,000 rpm Sterilisationautoclavable (121–134 °C) or ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesFits all Promed nail drills with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, autoclave (121–134 °C) or clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60). Never remove calluses too aggressively; work with light pressure. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) When to use medium, when coarse or fine? The medium grit is the all-rounder: for regular callus care or as an intermediate step between coarse removal and a fine finish. Can I autoclave the bit? Yes. This callus grinder is autoclavable (121–134 °C); alternatively, clean it in an ultrasonic bath. With the medium Promed sapphire callus grinder, you can care for calluses evenly and regularly.

Promed Sapphire Grinding Cone (190021) – for calluses and firm nail edges The Promed Sapphire Grinding Cone is a durable grinding tool with a natural sapphire coating for the targeted removal of calluses, hard skin and firm nail edges. The cone shape reaches corners, edges and hard-to-reach areas well. Fits all Promed nail drills with a 2.35 mm collet. Key features at a glance Material: Sapphire (natural corundum) – robust and long-lasting. Shape: Cone – ideal for edges, corners and precise work. Application: Skin/calluses and natural nails. Shank: Dental standard Ø 2.332–2.350 mm, fits all Promed devices with a standard collet. Recommended speed: up to 20,000 rpm. Cleaning: in an ultrasonic bath; not autoclavable. What is it used for and how?The sapphire grinding cone is suitable for gently and regularly removing calluses and for working on firm nail edges on hands and feet: Calluses & hard skin: remove over a wide area at low to medium speed with light pressure – never radically, but regularly in thin layers. Nail edges: carefully shape firm or thickened edges. Tip: if heat develops, reduce the speed and briefly lift the bit off. Technical data Article number190021 TypeGrinding cone, sapphire MaterialSapphire (natural corundum) Application areaSkin/calluses, natural nail ShankØ 2.332–2.350 mm (dental standard) Recommended speedup to 20,000 rpm Sterilisationnot autoclavable; ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe grinding cone fits all Promed nail drills with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions Clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60) after use; do not autoclave. Work with light pressure; never remove calluses radically. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) Which devices does the grinding cone fit? All Promed nail drills with a standard collet (shank Ø 2.35 mm). Can I autoclave the bit? No. This sapphire grinding cone is not autoclavable – clean it in an ultrasonic bath. For natural or artificial nails? Primarily for skin/calluses and the natural nail. For artificial nails, tungsten carbide or diamond bits are more suitable. With the Promed Sapphire Grinding Cone, you work on calluses and firm nail edges precisely and durably.

Promed Sapphire Grinding Cone (190028) – for calluses and firm nail edges The Promed Sapphire Grinding Cone is a durable grinding tool with a natural sapphire coating for the targeted removal of calluses, hard skin and firm nail edges. The cone shape reaches corners, edges and hard-to-reach areas well. Fits all Promed nail drills with a 2.35 mm collet. Key features at a glance Material: Sapphire (natural corundum) – robust and long-lasting. Shape: Cone – ideal for edges, corners and precise work. Application: Skin/calluses and natural nails. Shank: Dental standard Ø 2.332–2.350 mm, fits all Promed devices with a standard collet. Recommended speed: up to 20,000 rpm. Cleaning: autoclavable (121–134 °C) or in an ultrasonic bath. What is it used for and how?The sapphire grinding cone is suitable for gently and regularly removing calluses and for working on firm nail edges on hands and feet: Calluses & hard skin: remove over a wide area at low to medium speed with light pressure – never radically, but regularly in thin layers. Nail edges: carefully shape firm or thickened edges. Tip: if heat develops, reduce the speed and briefly lift the bit off. Technical data Article number190028 TypeGrinding cone, sapphire MaterialSapphire (natural corundum) Application areaSkin/calluses, natural nail ShankØ 2.332–2.350 mm (dental standard) Recommended speedup to 20,000 rpm Sterilisationautoclavable (121–134 °C) or ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe grinding cone fits all Promed nail drills with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, autoclave (121–134 °C) or clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60). Work with light pressure; never remove calluses radically. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) Which devices does the grinding cone fit? All Promed nail drills with a standard collet (shank Ø 2.35 mm). Can I autoclave the bit? Yes. This sapphire grinding cone is autoclavable (121–134 °C); alternatively, clean it in an ultrasonic bath. For natural or artificial nails? Primarily for skin/calluses and the natural nail. For artificial nails, tungsten carbide or diamond bits are more suitable. With the Promed Sapphire Grinding Cone, you work on calluses and firm nail edges precisely and durably.

Promed Sapphire Grinding Cone (190024) – for calluses and firm nail edges The Promed Sapphire Grinding Cone is a durable grinding tool with a natural sapphire coating for the targeted removal of calluses, hard skin and firm nail edges. The cone shape reaches corners, edges and hard-to-reach areas well. Fits all Promed nail drills with a 2.35 mm collet. Key features at a glance Material: Sapphire (natural corundum) – robust and long-lasting. Shape: Cone – ideal for edges, corners and precise work. Application: Skin/calluses and natural nails. Shank: Dental standard Ø 2.332–2.350 mm, fits all Promed devices with a standard collet. Recommended speed: up to 20,000 rpm. Cleaning: autoclavable (121–134 °C) or in an ultrasonic bath. What is it used for and how?The sapphire grinding cone is suitable for gently and regularly removing calluses and for working on firm nail edges on hands and feet: Calluses & hard skin: remove over a wide area at low to medium speed with light pressure – never radically, but regularly in thin layers. Nail edges: carefully shape firm or thickened edges. Tip: if heat develops, reduce the speed and briefly lift the bit off. Technical data Article number190024 TypeGrinding cone, sapphire MaterialSapphire (natural corundum) Application areaSkin/calluses, natural nail ShankØ 2.332–2.350 mm (dental standard) Recommended speedup to 20,000 rpm Sterilisationautoclavable (121–134 °C) or ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe grinding cone fits all Promed nail drills with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, autoclave (121–134 °C) or clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60). Work with light pressure; never remove calluses radically. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) Which devices does the grinding cone fit? All Promed nail drills with a standard collet (shank Ø 2.35 mm). Can I autoclave the bit? Yes. This sapphire grinding cone is autoclavable (121–134 °C); alternatively, clean it in an ultrasonic bath. For natural or artificial nails? Primarily for skin/calluses and the natural nail. For artificial nails, tungsten carbide or diamond bits are more suitable. With the Promed Sapphire Grinding Cone, you work on calluses and firm nail edges precisely and durably.

Promed Sapphire Grinding Cone (190026) – for calluses and firm nail edges The Promed Sapphire Grinding Cone is a durable grinding tool with a natural sapphire coating for the targeted removal of calluses, hard skin and firm nail edges. The cone shape reaches corners, edges and hard-to-reach areas well. Fits all Promed nail drills with a 2.35 mm collet. Key features at a glance Material: Sapphire (natural corundum) – robust and long-lasting. Shape: Cone – ideal for edges, corners and precise work. Application: Skin/calluses and natural nails. Shank: Dental standard Ø 2.332–2.350 mm, fits all Promed devices with a standard collet. Recommended speed: up to 20,000 rpm. Cleaning: autoclavable (121–134 °C) or in an ultrasonic bath. What is it used for and how?The sapphire grinding cone is suitable for gently and regularly removing calluses and for working on firm nail edges on hands and feet: Calluses & hard skin: remove over a wide area at low to medium speed with light pressure – never radically, but regularly in thin layers. Nail edges: carefully shape firm or thickened edges. Tip: if heat develops, reduce the speed and briefly lift the bit off. Technical data Article number190026 TypeGrinding cone, sapphire MaterialSapphire (natural corundum) Application areaSkin/calluses, natural nail ShankØ 2.332–2.350 mm (dental standard) Recommended speedup to 20,000 rpm Sterilisationautoclavable (121–134 °C) or ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe grinding cone fits all Promed nail drills with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, autoclave (121–134 °C) or clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60). Work with light pressure; never remove calluses radically. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) Which devices does the grinding cone fit? All Promed nail drills with a standard collet (shank Ø 2.35 mm). Can I autoclave the bit? Yes. This sapphire grinding cone is autoclavable (121–134 °C); alternatively, clean it in an ultrasonic bath. For natural or artificial nails? Primarily for skin/calluses and the natural nail. For artificial nails, tungsten carbide or diamond bits are more suitable. With the Promed Sapphire Grinding Cone, you work on calluses and firm nail edges precisely and durably.

Promed Sapphire Grinding Cone, small (190031) – for fine and small areas The Promed Sapphire Grinding Cone in the small version is a durable grinding tool with a natural sapphire coating. Its small, slim head reaches fine and hard-to-access areas with precision – ideal for the targeted treatment of firm nail edges and smaller callus areas. Fits all Promed nail drills with a 2.35 mm collet. Key features at a glance Material: Sapphire (natural corundum) – robust and durable. Shape: small cone – for fine, small and hard-to-reach areas. Application: skin/calluses and natural nail. Shank: dental standard Ø 2.332–2.350 mm, fits all Promed devices with a standard collet. Recommended speed: up to 20,000 rpm. Cleaning: autoclavable (121–134 °C) or in an ultrasonic bath. What is it used for and how?The small sapphire grinding cone is suited to fine, targeted treatment on hands and feet: Nail edges & corners: shape firm or thickened edges and tight corners with precision. Small callus areas: remove limited hard skin over the surface with light pressure. Tip: the small head allows precise work; if heat builds up, reduce the speed and lift off briefly. Technical data Article number190031 TypeGrinding cone small, sapphire MaterialSapphire (natural corundum) Application areaSkin/calluses, natural nail ShankØ 2.332–2.350 mm (dental standard) Recommended speedup to 20,000 rpm Sterilizationautoclavable (121–134 °C) or ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe grinding cone fits all Promed nail drills with a standard collet (2.35 mm), including the Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, autoclave (121–134 °C) or clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60). Work with light pressure; never remove calluses radically. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) What is the small version good for? The small head is suited to fine, small and hard-to-reach areas – such as tight nail edges and limited callus areas. Can I autoclave the bit? Yes. This sapphire grinding cone is autoclavable (121–134 °C); alternatively, clean it in an ultrasonic bath. For natural or artificial nails? Primarily for skin/calluses and the natural nail. For artificial nails, tungsten carbide or diamond bits are better suited. With the small Promed Sapphire Grinding Cone you work on fine and hard-to-reach areas with particular precision.

Promed Sapphire Grinding Cone small (190027) – for fine and small areas The Promed Sapphire Grinding Cone in a small design is a durable grinding tool with a natural sapphire coating. Its small, slim head reaches fine and hard-to-reach areas precisely – ideal for the accurate treatment of firm nail edges and smaller callus areas. Fits all Promed nail drills with a 2.35 mm collet. Key features at a glance Material: Sapphire (natural corundum) – robust and long-lasting. Shape: Small cone – for fine, small and hard-to-reach areas. Application: Skin/calluses and natural nails. Shank: Dental standard Ø 2.332–2.350 mm, fits all Promed devices with a standard collet. Recommended speed: up to 20,000 rpm. Cleaning: autoclavable (121–134 °C) or in an ultrasonic bath. What is it used for and how?The small sapphire grinding cone is suitable for fine, precise work on hands and feet: Nail edges & corners: precisely shape firm or thickened edges and tight corners. Small callus areas: remove limited hard skin over a wide area with light pressure. Tip: the small head allows precise work; if heat develops, reduce the speed and briefly lift off. Technical data Article number190027 TypeGrinding cone small, sapphire MaterialSapphire (natural corundum) Application areaSkin/calluses, natural nail ShankØ 2.332–2.350 mm (dental standard) Recommended speedup to 20,000 rpm Sterilisationautoclavable (121–134 °C) or ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe grinding cone fits all Promed nail drills with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, autoclave (121–134 °C) or clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60). Work with light pressure; never remove calluses radically. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) What is the small version good for? The small head is suitable for fine, small and hard-to-reach areas – such as tight nail edges and limited callus areas. Can I autoclave the bit? Yes. This sapphire grinding cone is autoclavable (121–134 °C); alternatively, clean it in an ultrasonic bath. For natural or artificial nails? Primarily for skin/calluses and the natural nail. For artificial nails, tungsten carbide or diamond bits are more suitable. With the small Promed Sapphire Grinding Cone, you work particularly precisely on fine and hard-to-reach areas.

Promed Sapphire Grinding Cone, small (190029) – for fine and small areas The Promed Sapphire Grinding Cone in the small version is a durable grinding tool with a natural sapphire coating. Its small, slim head reaches fine and hard-to-access areas with precision – ideal for the targeted treatment of firm nail edges and smaller callus areas. Fits all Promed nail drills with a 2.35 mm collet. Key features at a glance Material: Sapphire (natural corundum) – robust and durable. Shape: small cone – for fine, small and hard-to-reach areas. Application: skin/calluses and natural nail. Shank: dental standard Ø 2.332–2.350 mm, fits all Promed devices with a standard collet. Recommended speed: up to 20,000 rpm. Cleaning: autoclavable (121–134 °C) or in an ultrasonic bath. What is it used for and how?The small sapphire grinding cone is suited to fine, targeted treatment on hands and feet: Nail edges & corners: shape firm or thickened edges and tight corners with precision. Small callus areas: remove limited hard skin over the surface with light pressure. Tip: the small head allows precise work; if heat builds up, reduce the speed and lift off briefly. Technical data Article number190029 TypeGrinding cone small, sapphire MaterialSapphire (natural corundum) Application areaSkin/calluses, natural nail ShankØ 2.332–2.350 mm (dental standard) Recommended speedup to 20,000 rpm Sterilizationautoclavable (121–134 °C) or ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe grinding cone fits all Promed nail drills with a standard collet (2.35 mm), including the Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, autoclave (121–134 °C) or clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60). Work with light pressure; never remove calluses radically. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) What is the small version good for? The small head is suited to fine, small and hard-to-reach areas – such as tight nail edges and limited callus areas. Can I autoclave the bit? Yes. This sapphire grinding cone is autoclavable (121–134 °C); alternatively, clean it in an ultrasonic bath. For natural or artificial nails? Primarily for skin/calluses and the natural nail. For artificial nails, tungsten carbide or diamond bits are better suited. With the small Promed Sapphire Grinding Cone you work on fine and hard-to-reach areas with particular precision.

Promed Sapphire Grinding Disc (190011) – for shortening and shaping nails The Promed Sapphire Grinding Disc is a durable grinding tool with a natural sapphire coating for shortening, shaping and smoothing fingernails and toenails. The disc shape works flat along the nail edge. Fits all Promed nail drills with a 2.35 mm collet. Key features at a glance Material: Sapphire (natural corundum) – robust and long-lasting. Shape: Disc – for shortening and shaping the nail edge over a wide area. Application: Natural nails on hands and feet. Shank: Dental standard Ø 2.332–2.350 mm, fits all Promed devices with a standard collet. Recommended speed: up to 10,000 rpm. Cleaning: in an ultrasonic bath. What is it used for and how? Shortening nails: guide the disc along the side of the nail edge and reduce the length in small steps. Shaping: work the edges cleanly and evenly. Tip: work with light pressure and an even motion; pause briefly if it gets warm. Technical data Article number190011 TypeGrinding disc, sapphire MaterialSapphire (natural corundum) Application areaNatural nail ShankØ 2.332–2.350 mm (dental standard) Recommended speedup to 10,000 rpm Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesFits all Promed nail drills with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions Clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60) after use. Work with light pressure; do not overheat the nails. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) What is the grinding disc suitable for? For shortening and shaping natural nails on hands and feet. Which devices does it fit? All Promed nail drills with a standard collet (shank Ø 2.35 mm). With the Promed Sapphire Grinding Disc, you shorten and shape your nails quickly and evenly.

Promed Sapphire Bit, long (198034) – for longer surfaces and larger nails The Promed Sapphire Bit in a long shape is a durable grinding bit with a natural sapphire coating. The long, cylindrical shape works over a larger surface – ideal for evenly working on firm nail edges and larger nails as well as for removing callus across a surface. Fits all Promed nail drills with a 2.35 mm collet. Features at a glance Material: sapphire (natural corundum) – robust and durable. Shape: long/cylindrical – for longer surfaces and larger nails. Application: skin/callus and natural nail. Shank: dental standard Ø 2.332–2.350 mm, suitable for all Promed devices with a standard collet. Recommended speed: up to 25,000 rpm. Cleaning: autoclavable (121–134 °C) or in an ultrasonic bath. What is it used for and how?The long sapphire bit is suitable for even, surface work on hands and feet: Larger nails & edges: shape firm or thickened edges evenly along their length. Callus: remove across a surface in thin layers with little pressure. Tip: the long shape covers larger surfaces; reduce the speed and pause briefly if heat builds up. Technical data Article number198034 Typesapphire bit, long Materialsapphire (natural corundum) Area of applicationskin/callus, natural nail ShankØ 2.332–2.350 mm (dental standard) Recommended speedup to 25,000 rpm Sterilisationautoclavable (121–134 °C) or ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe bit fits all Promed nail drills with a standard collet (2.35 mm), including the Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, autoclave (121–134 °C) or clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60). Work with little pressure; never remove callus too aggressively. In case of diabetes or circulatory disorders, seek medical advice beforehand. Frequently asked questions (FAQ) What is the long shape good for? The long, cylindrical shape covers larger surfaces – ideal for larger nails, longer edges and surface callus removal. Can I autoclave the bit? Yes. This sapphire bit is autoclavable (121–134 °C); alternatively, clean it in an ultrasonic bath. For natural or artificial nails? Primarily for skin/callus and the natural nail. For artificial nails, tungsten carbide or diamond bits are more suitable. With the long Promed Sapphire Bit you work on larger nails and surfaces evenly.

Promed Sapphire Bit, pointed (198030) – for edges, corners and the nail fold The Promed Sapphire Bit in a pointed shape is a durable grinding bit with a natural sapphire coating. The pointed shape reaches tight nail edges, corners and the nail fold precisely – ideal for fine, pinpoint work on firm nail edges and small callused areas. Fits all Promed nail drills with a 2.35 mm collet. Features at a glance Material: sapphire (natural corundum) – robust and durable. Shape: pointed – for tight edges, corners and the nail fold. Application: skin/callus and natural nail. Shank: dental standard Ø 2.332–2.350 mm, suitable for all Promed devices with a standard collet. Recommended speed: up to 25,000 rpm. Cleaning: autoclavable (121–134 °C) or in an ultrasonic bath. What is it used for and how?The pointed sapphire bit is suitable for fine, pinpoint work on hands and feet: Nail edges & nail fold: shape firm or thickened edges and tight corners precisely. Small callused areas: remove limited calluses with little pressure. Tip: the point allows precise work; reduce the speed and pause briefly if heat builds up. Technical data Article number198030 Typesapphire bit, pointed Materialsapphire (natural corundum) Area of applicationskin/callus, natural nail ShankØ 2.332–2.350 mm (dental standard) Recommended speedup to 25,000 rpm Sterilisationautoclavable (121–134 °C) or ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe bit fits all Promed nail drills with a standard collet (2.35 mm), including the Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, autoclave (121–134 °C) or clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60). Work with little pressure; never remove callus too aggressively. In case of diabetes or circulatory disorders, seek medical advice beforehand. Frequently asked questions (FAQ) What is the pointed shape good for? The point reaches tight nail edges, corners and the nail fold precisely – for fine, pinpoint work. Can I autoclave the bit? Yes. This sapphire bit is autoclavable (121–134 °C); alternatively, clean it in an ultrasonic bath. For natural or artificial nails? Primarily for skin/callus and the natural nail. For artificial nails, tungsten carbide or diamond bits are more suitable. With the pointed Promed Sapphire Bit you work on tight edges and the nail fold with particular precision.

Promed Sapphire Bit, round (198031) – for surface work and callus The Promed Sapphire Bit in a round shape is a durable grinding bit with a natural sapphire coating. The round shape works gently over a surface – ideal for softly removing callus and smoothing firm nail edges on hands and feet. Fits all Promed nail drills with a 2.35 mm collet. Features at a glance Material: sapphire (natural corundum) – robust and durable. Shape: round – for gentle, surface work. Application: skin/callus and natural nail. Shank: dental standard Ø 2.332–2.350 mm, suitable for all Promed devices with a standard collet. Recommended speed: up to 25,000 rpm. Cleaning: autoclavable (121–134 °C) or in an ultrasonic bath. What is it used for and how?The round sapphire bit is suitable for gentle, surface work on hands and feet: Callus & hard skin: remove across a surface in thin layers with little pressure. Nail edges: smooth and round off firm edges gently. Tip: the round shape avoids sharp edges; reduce the speed and pause briefly if heat builds up. Technical data Article number198031 Typesapphire bit, round Materialsapphire (natural corundum) Area of applicationskin/callus, natural nail ShankØ 2.332–2.350 mm (dental standard) Recommended speedup to 25,000 rpm Sterilisationautoclavable (121–134 °C) or ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe bit fits all Promed nail drills with a standard collet (2.35 mm), including the Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, autoclave (121–134 °C) or clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60). Work with little pressure; never remove callus too aggressively. In case of diabetes or circulatory disorders, seek medical advice beforehand. Frequently asked questions (FAQ) What is the round shape good for? The round shape works gently over a surface – ideal for softly removing callus and rounding off firm nail edges. Can I autoclave the bit? Yes. This sapphire bit is autoclavable (121–134 °C); alternatively, clean it in an ultrasonic bath. For natural or artificial nails? Primarily for skin/callus and the natural nail. For artificial nails, tungsten carbide or diamond bits are more suitable. With the round Promed Sapphire Bit you remove callus gently and across a surface.