Polishing Bits

Promed Polishing Cone Felt (190041) – for a silky high gloss on the nail surface The Promed Polishing Cone made of felt is the finishing attachment for a silky high gloss. It smooths the nail surface and brings it – often together with polishing paste – to a natural shine. The cone shape reaches the surface, corners and edges well. The polishing cone does not remove any material, it polishes. Fits all Promed nail drills with a 2.35 mm collet. Key features at a glance Material: felt. Shape: cone – for the surface, corners and edges. Function: high-gloss polishing of the nail surface – not for material removal. Application: natural nail and artificial nail. Shank: dental standard Ø 2.332–2.350 mm, fits all Promed devices with a standard collet. Recommended speed: up to 10,000 rpm. Cleaning: in an ultrasonic bath; not autoclavable. What is it used for and how?The felt polishing cone is the final step for a shiny natural nail: High-gloss polish: guide it over the previously smoothed nail surface at low speed and with light pressure – optionally with a little polishing paste for a more intense shine. Tip: use it after the silicone polishers (coarse → medium → fine) to round off the finish. Note: if heat builds up, reduce the speed and lift the attachment off briefly. Technical data Article number190041 TypePolishing cone, felt MaterialFelt FunctionHigh-gloss polishing (no material removal) Application areaNatural nail, artificial nail ShankØ 2.332–2.350 mm (dental standard) Recommended speedup to 10,000 rpm Sterilizationnot autoclavable; ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe polishing cone fits all Promed nail drills with a standard collet (2.35 mm), including the Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60); do not autoclave (heat-sensitive). Work at low speed and with light pressure. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) Does the polishing cone remove material? No. The felt polishing cone smooths and polishes the nail surface to a high gloss – it is not intended for material removal. What speed should I work at? At low speed (up to 10,000 rpm) and with light pressure. If heat builds up, reduce the speed. Can I autoclave the polishing cone? No. Polishers are heat-sensitive and not autoclavable – clean them in an ultrasonic bath. With the Promed Polishing Cone Felt you bring the nail surface to a silky high gloss.

Promed Polishing Brush Small, Goat Hair (190086) – for a gentle natural shine on the nail surface The Promed small polishing brush made of goat hair brings the nail surface to a gentle shine with soft natural bristles. It is especially suited to a gentle final finish – also with polishing paste – and, thanks to its small shape, reaches narrow nails and details well. The polishing brush does not remove any material, it polishes. Fits all Promed nail drills with a 2.35 mm collet. Key features at a glance Material: goat hair (natural bristles). Shape: small brush – for narrow nails and details. Function: gentle polishing of the nail surface to a natural shine – not for removal. Application: natural nail and artificial nail. Shank: dental standard Ø 2.332–2.350 mm, suitable for all Promed devices with a standard collet. Recommended speed: up to 8,000 rpm. Cleaning: in an ultrasonic bath; not autoclavable. What is it used for and how?The goat-hair polishing brush is the particularly gentle final touch for shiny nails: Natural shine: guide it over the previously smoothed nail surface at low speed and with light pressure – optionally with a little polishing paste. Tip: use it after the silicone or felt polishers to achieve a soft, natural finish. Note: the soft natural bristles are particularly gentle on the nail surface. Technical data Article number190086 TypePolishing brush, small MaterialGoat hair (natural bristles) Functiongentle polishing (no removal) Application areaNatural nail, artificial nail ShankØ 2.332–2.350 mm (dental standard) Recommended speedup to 8,000 rpm Sterilisationnot autoclavable; ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe polishing brush fits all Promed nail drills with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions Clean after use in an ultrasonic bath (e.g. Promed UC-50 / UC-60); do not autoclave (heat-sensitive). Work at low speed and with light pressure. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) Does the polishing brush remove material? No. The goat-hair brush polishes the nail surface to a natural shine – it is not intended for removal. What speed should I use? Use a low speed (up to 8,000 rpm) and light pressure – for a soft, natural finish. Can I autoclave the polishing brush? No. Polishers are heat-sensitive and not autoclavable – clean them in an ultrasonic bath. With the Promed goat-hair polishing brush, you can bring the nail surface to a natural shine particularly gently.

Promed Silicone Polisher fine, yellow (198130) – for gently smoothing and polishing the nail surface The Promed Silicone Polisher fine (yellow) gently smooths and polishes the nail surface to a silky finish. The yellow colour indicates the fine grit – ideal for the final polishing step on natural and artificial nails. The polisher does not remove any material; it smooths and adds shine. Fits all Promed nail drills with a 2.35 mm collet. Features at a glance Material: silicone with embedded grinding grit. Grit / colour code: fine – yellow. Function: smoothing and high-gloss polishing of the nail surface – not for removal. Application: natural nail and artificial nail. Shank: dental standard Ø 2.332–2.350 mm, suitable for all Promed devices with a standard collet. Recommended speed: max. 8,000 rpm – higher speeds can discolour the nail. Cleaning: in an ultrasonic bath; not autoclavable. What is it used for and how?The fine silicone polisher is the final step for a smooth, shiny nail surface: Polishing: guide it across the nail surface at low speed with light pressure until it is smooth and shiny. Important: do not exceed 8,000 rpm – too high a speed generates heat and can discolour the nail. Tip: work through the colour sequence yellow (fine) → black (medium) → green (coarse); yellow is the finest, final step. Technical data Article number198130 Typesilicone polisher, fine Grit / colourfine / yellow Functionsmoothing & polishing (no removal) Area of applicationnatural nail, artificial nail ShankØ 2.332–2.350 mm (dental standard) Recommended speedmax. 8,000 rpm Sterilisationnot autoclavable; ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe silicone polisher fits all Promed nail drills with a standard collet (2.35 mm), including the Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60); do not autoclave (heat-sensitive). Keep to max. 8,000 rpm; work with little pressure. In case of diabetes or circulatory disorders, seek medical advice beforehand. Frequently asked questions (FAQ) What does the yellow colour mean? The colour code indicates the grit: yellow = fine. For coarser work there are black (medium) and green (coarse). Why must I not work faster than 8,000 rpm? Higher speeds generate heat and friction that can discolour the nail. For a clean polishing result, stay at max. 8,000 rpm. Can I autoclave the polisher? No. Silicone polishers are heat-sensitive and not autoclavable – clean them in an ultrasonic bath. With the Promed Silicone Polisher fine (yellow) you gently smooth and polish the nail surface to a silky shine.

Promed Silicone Polisher medium, black (198131) – for smoothing and pre-polishing the nail surface The Promed Silicone Polisher medium (black) smooths the nail surface and prepares it for high-gloss polishing. The black colour indicates the medium grit – the intermediate step between coarse preparatory work and fine final polishing on natural and artificial nails. The polisher does not remove any material; it smooths. Fits all Promed nail drills with a 2.35 mm collet. Features at a glance Material: silicone with embedded grinding grit. Grit / colour code: medium – black. Function: smoothing and pre-polishing of the nail surface – not for removal. Application: natural nail and artificial nail. Shank: dental standard Ø 2.332–2.350 mm, suitable for all Promed devices with a standard collet. Recommended speed: max. 8,000 rpm – higher speeds can discolour the nail. Cleaning: in an ultrasonic bath; not autoclavable. What is it used for and how?The medium silicone polisher is the intermediate step for an evenly smooth nail surface: Smoothing & pre-polishing: guide it across the nail surface at low speed with light pressure to even out irregularities. Important: do not exceed 8,000 rpm – too high a speed generates heat and can discolour the nail. Tip: work through the colour sequence green (coarse) → black (medium) → yellow (fine); black follows the coarse preparatory work. Technical data Article number198131 Typesilicone polisher, medium Grit / colourmedium / black Functionsmoothing & pre-polishing (no removal) Area of applicationnatural nail, artificial nail ShankØ 2.332–2.350 mm (dental standard) Recommended speedmax. 8,000 rpm Sterilisationnot autoclavable; ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe silicone polisher fits all Promed nail drills with a standard collet (2.35 mm), including the Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60); do not autoclave (heat-sensitive). Keep to max. 8,000 rpm; work with little pressure. In case of diabetes or circulatory disorders, seek medical advice beforehand. Frequently asked questions (FAQ) What does the black colour mean? The colour code indicates the grit: black = medium. Finer is yellow, coarser is green. Why must I not work faster than 8,000 rpm? Higher speeds generate heat and friction that can discolour the nail. For a clean result, stay at max. 8,000 rpm. Can I autoclave the polisher? No. Silicone polishers are heat-sensitive and not autoclavable – clean them in an ultrasonic bath. With the Promed Silicone Polisher medium (black) you smooth the nail surface evenly and prepare it for a high-gloss finish.

Promed Silicone Polisher pointed (198133) – for smoothing and polishing at corners and the nail fold The Promed Silicone Polisher pointed smooths and polishes the nail surface precisely in hard-to-reach areas. The pointed shape reaches corners, edges and the nail fold well – ideal for detail finishing on natural and artificial nails. The polisher does not remove any material; it smooths and adds shine. Fits all Promed nail drills with a 2.35 mm collet. Features at a glance Material: silicone with embedded grinding grit. Shape: pointed – for corners, edges and the nail fold. Function: smoothing and polishing the nail surface at detail points – not for removal. Application: natural nail and artificial nail. Shank: dental standard Ø 2.332–2.350 mm, suitable for all Promed devices with a standard collet. Recommended speed: max. 8,000 rpm – higher speeds can discolour the nail. Cleaning: in an ultrasonic bath; not autoclavable. What is it used for and how?The pointed silicone polisher is the addition for corners and hard-to-reach areas: Detail polishing: smooth and polish at corners, edges and in the nail fold at low speed with light pressure. Important: do not exceed 8,000 rpm – too high a speed generates heat and can discolour the nail. Tip: ideal as a complement to the surface silicone polishers (yellow, black, green) for finishing details. Technical data Article number198133 Typesilicone polisher, pointed Shapepointed – for corners/nail fold Functionsmoothing & polishing (no removal) Area of applicationnatural nail, artificial nail ShankØ 2.332–2.350 mm (dental standard) Recommended speedmax. 8,000 rpm Sterilisationnot autoclavable; ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe silicone polisher fits all Promed nail drills with a standard collet (2.35 mm), including the Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60); do not autoclave (heat-sensitive). Keep to max. 8,000 rpm; work with little pressure. In case of diabetes or circulatory disorders, seek medical advice beforehand. Frequently asked questions (FAQ) What is the pointed shape intended for? For corners, edges and the nail fold – wherever surface polishers cannot reach well. Why must I not work faster than 8,000 rpm? Higher speeds generate heat and friction that can discolour the nail. For a clean result, stay at max. 8,000 rpm. Can I autoclave the polisher? No. Silicone polishers are heat-sensitive and not autoclavable – clean them in an ultrasonic bath. With the Promed Silicone Polisher pointed you smooth and polish the nail surface precisely at corners and in the nail fold.

Promed Silicone Polisher coarse, green (198132) – for smoothing coarser irregularities of the nail surface The Promed Silicone Polisher coarse (green) smooths the nail surface in the first polishing step and levels out coarser irregularities. The green colour indicates the coarse grit – the preliminary stage before medium and fine polishing on natural and artificial nails. The polisher does not remove any material; it smooths. Fits all Promed nail drills with a 2.35 mm collet. Features at a glance Material: silicone with embedded grinding grit. Grit / colour code: coarse – green. Function: smoothing coarser irregularities of the nail surface – not for removal. Application: natural nail and artificial nail. Shank: dental standard Ø 2.332–2.350 mm, suitable for all Promed devices with a standard collet. Recommended speed: max. 8,000 rpm – higher speeds can discolour the nail. Cleaning: in an ultrasonic bath; not autoclavable. What is it used for and how?The coarse silicone polisher is the first step towards an even nail surface: Smoothing: level out coarser irregularities of the nail surface at low speed with light pressure. Important: do not exceed 8,000 rpm – too high a speed generates heat and can discolour the nail. Tip: work through the colour sequence green (coarse) → black (medium) → yellow (fine); green is the start. Technical data Article number198132 Typesilicone polisher, coarse Grit / colourcoarse / green Functionsmoothing (no removal) Area of applicationnatural nail, artificial nail ShankØ 2.332–2.350 mm (dental standard) Recommended speedmax. 8,000 rpm Sterilisationnot autoclavable; ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe silicone polisher fits all Promed nail drills with a standard collet (2.35 mm), including the Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60); do not autoclave (heat-sensitive). Keep to max. 8,000 rpm; work with little pressure. In case of diabetes or circulatory disorders, seek medical advice beforehand. Frequently asked questions (FAQ) What does the green colour mean? The colour code indicates the grit: green = coarse. Finer are black (medium) and yellow (fine). Why must I not work faster than 8,000 rpm? Higher speeds generate heat and friction that can discolour the nail. For a clean result, stay at max. 8,000 rpm. Can I autoclave the polisher? No. Silicone polishers are heat-sensitive and not autoclavable – clean them in an ultrasonic bath. With the Promed Silicone Polisher coarse (green) you smooth coarser irregularities of the nail surface as the first polishing step.

Promed Soft Polisher Leather (198570) – for a premium high gloss on the nail surface The Promed Soft Polisher made of leather is the soft finishing attachment for an elegant high gloss. The leather surface polishes the nail surface – often together with polishing paste – to an even, premium shine. The soft polisher does not remove any material, it polishes. Fits all Promed drill devices with a 2.35 mm collet. Key features at a glance Material: leather. Function: high-gloss polishing of the nail surface – not for material removal. Application: natural nail and artificial nail. Shaft: dental size Ø 2.332–2.350 mm, suitable for all Promed devices with a standard collet. Recommended speed: low, approx. 5,000–10,000 rpm. Cleaning: in an ultrasonic bath; not autoclavable. What is it used for and how?The leather soft polisher is the premium final step for shiny nails: High-gloss polish: guide it over the previously smoothed nail surface at low speed and with light pressure – optionally with a little polishing paste for a more intense shine. Tip: use it after the silicone polishers (coarse → medium → fine) to round off the finish. Note: if heat develops, reduce the speed and briefly lift off the attachment. Technical data Article number198570 TypeSoft polisher, leather MaterialLeather FunctionHigh-gloss polishing (no material removal) Application areaNatural nail, artificial nail ShaftØ 2.332–2.350 mm (dental size) Recommended speedapprox. 5,000–10,000 rpm Sterilisationnot autoclavable; ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe soft polisher fits all Promed drill devices with a standard collet (2.35 mm), including the Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, clean in an ultrasonic bath (e. g. Promed UC-50 / UC-60); do not autoclave (heat-sensitive). Work at low speed and with little pressure. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) Does the soft polisher remove material? No. The leather soft polisher polishes the nail surface to a high gloss – it is not intended for material removal. What speed should I work at? At low speed (approx. 5,000–10,000 rpm) and with light pressure. If it gets warm, reduce the speed. Can I autoclave the soft polisher? No. Polishers are heat-sensitive and not autoclavable – clean them in an ultrasonic bath. With the Promed Soft Polisher Leather you bring the nail surface to a premium high gloss.

Promed Soft Polisher Textile (198571) – for an even high gloss on the nail surface The Promed Soft Polisher made of textile is the soft finishing attachment for an even high gloss. The textile surface polishes the nail surface – often together with polishing paste – to a natural, silky shine. The soft polisher does not remove any material, it polishes. Fits all Promed drill devices with a 2.35 mm collet. Key features at a glance Material: textile. Function: high-gloss polishing of the nail surface – not for material removal. Application: natural nail and artificial nail. Shaft: dental size Ø 2.332–2.350 mm, suitable for all Promed devices with a standard collet. Recommended speed: low, approx. 5,000–10,000 rpm. Cleaning: in an ultrasonic bath; not autoclavable. What is it used for and how?The textile soft polisher is the soft final step for shiny nails: High-gloss polish: guide it over the previously smoothed nail surface at low speed and with light pressure – optionally with a little polishing paste for a more intense shine. Tip: use it after the silicone polishers (coarse → medium → fine) to round off the finish. Note: if heat develops, reduce the speed and briefly lift off the attachment. Technical data Article number198571 TypeSoft polisher, textile MaterialTextile FunctionHigh-gloss polishing (no material removal) Application areaNatural nail, artificial nail ShaftØ 2.332–2.350 mm (dental size) Recommended speedapprox. 5,000–10,000 rpm Sterilisationnot autoclavable; ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe soft polisher fits all Promed drill devices with a standard collet (2.35 mm), including the Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, clean in an ultrasonic bath (e. g. Promed UC-50 / UC-60); do not autoclave (heat-sensitive). Work at low speed and with little pressure. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) Does the soft polisher remove material? No. The textile soft polisher polishes the nail surface to a high gloss – it is not intended for material removal. What speed should I work at? At low speed (approx. 5,000–10,000 rpm) and with light pressure. If it gets warm, reduce the speed. Can I autoclave the soft polisher? No. Polishers are heat-sensitive and not autoclavable – clean them in an ultrasonic bath. With the Promed Soft Polisher Textile you bring the nail surface to an even high gloss.

Promed Soft Polisher Textile (198572) – for a silky high gloss on the nail surface The Promed Soft Polisher made of textile is the soft finishing attachment for a silky high gloss. The textile surface polishes the nail surface – often together with polishing paste – to a natural, even shine. The soft polisher does not remove any material, it polishes. Fits all Promed drill devices with a 2.35 mm collet. Key features at a glance Material: textile. Function: high-gloss polishing of the nail surface – not for material removal. Application: natural nail and artificial nail. Shaft: dental size Ø 2.332–2.350 mm, suitable for all Promed devices with a standard collet. Recommended speed: low, approx. 5,000–10,000 rpm. Cleaning: in an ultrasonic bath; not autoclavable. What is it used for and how?The textile soft polisher is the soft final step for shiny nails: High-gloss polish: guide it over the previously smoothed nail surface at low speed and with light pressure – optionally with a little polishing paste for a more intense shine. Tip: use it after the silicone polishers (coarse → medium → fine) to round off the finish. Note: if heat develops, reduce the speed and briefly lift off the attachment. Technical data Article number198572 TypeSoft polisher, textile MaterialTextile FunctionHigh-gloss polishing (no material removal) Application areaNatural nail, artificial nail ShaftØ 2.332–2.350 mm (dental size) Recommended speedapprox. 5,000–10,000 rpm Sterilisationnot autoclavable; ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe soft polisher fits all Promed drill devices with a standard collet (2.35 mm), including the Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, clean in an ultrasonic bath (e. g. Promed UC-50 / UC-60); do not autoclave (heat-sensitive). Work at low speed and with little pressure. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) Does the soft polisher remove material? No. The textile soft polisher polishes the nail surface to a high gloss – it is not intended for material removal. What speed should I work at? At low speed (approx. 5,000–10,000 rpm) and with light pressure. If it gets warm, reduce the speed. Can I autoclave the soft polisher? No. Polishers are heat-sensitive and not autoclavable – clean them in an ultrasonic bath. With the Promed Soft Polisher Textile you bring the nail surface to a silky high gloss.