Ceramic Bits

Promed Ceramic Bit cone (198603) – for artificial nails only The Promed Ceramic Bit in a cone shape works especially low in heat and splinter-free. Ceramic generates considerably less heat during grinding than metal bits and is suitable for artificial-nail modelling (gel/acrylic); not for the natural nail. Fits all Promed rotary tools with a 2.35 mm collet. Key features at a glance Material: ceramic – low in heat and splinter-free. Shape: cone – for surfaces, edges and transitions. Application: artificial nail / gel (modelling) only; not for the natural nail. Shaft: dental size Ø 2.332–2.350 mm, for all Promed devices with a standard collet. Recommended speed: up to 25,000 rpm. Cleaning: autoclavable (121–134 °C) or in an ultrasonic bath. What is it used for and how? Artificial nail modelling: remove gel/acrylic material; not for the natural nail. Low in heat: ceramic heats up more slowly – comfortable during longer sessions. Tip: work at medium speed and with light pressure; do not drop ceramic bits. Technical data Article number198603 TypeCeramic bit, cone Materialceramic (low in heat, splinter-free) Shapecone Application areaartificial nail / gel (modelling); not for the natural nail ShaftØ 2.332–2.350 mm (dental size) Recommended speedup to 25,000 rpm Sterilisationautoclavable (121–134 °C) or ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesFits all Promed rotary tools with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, autoclave (121–134 °C) or clean in an ultrasonic bath (e. g. Promed UC-50 / UC-60). Ceramic is fragile – do not drop; work with light pressure. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) What is the advantage of ceramic? Ceramic works low in heat and splinter-free and is suitable for artificial-nail modelling (gel/acrylic); not for the natural nail – comfortable even during longer sessions. Can I autoclave the bit? Yes. This ceramic bit is autoclavable (121–134 °C); alternatively, clean it in an ultrasonic bath. Which devices does it fit? All Promed rotary tools with a standard collet (shaft Ø 2.35 mm). With the Promed Ceramic Bit (cone) you work low in heat and splinter-free on artificial-nail modelling (gel/acrylic); not for the natural nail.

Promed Ceramic Bit cone (198606) – for artificial nails only The Promed Ceramic Bit in a cone shape works especially low in heat and splinter-free. Ceramic generates considerably less heat during grinding than metal bits and is suitable for artificial-nail modelling (gel/acrylic); not for the natural nail. Fits all Promed rotary tools with a 2.35 mm collet. Key features at a glance Material: ceramic – low in heat and splinter-free. Shape: cone – for surfaces, edges and transitions. Application: artificial nail / gel (modelling) only; not for the natural nail. Shaft: dental size Ø 2.332–2.350 mm, for all Promed devices with a standard collet. Recommended speed: up to 20,000 rpm. Cleaning: autoclavable (121–134 °C) or in an ultrasonic bath. What is it used for and how? Artificial nail modelling: remove gel/acrylic material; not for the natural nail. Low in heat: ceramic heats up more slowly – comfortable during longer sessions. Tip: work at medium speed and with light pressure; do not drop ceramic bits. Technical data Article number198606 TypeCeramic bit, cone Materialceramic (low in heat, splinter-free) Shapecone Application areaartificial nail / gel (modelling); not for the natural nail ShaftØ 2.332–2.350 mm (dental size) Recommended speedup to 20,000 rpm Sterilisationautoclavable (121–134 °C) or ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesFits all Promed rotary tools with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, autoclave (121–134 °C) or clean in an ultrasonic bath (e. g. Promed UC-50 / UC-60). Ceramic is fragile – do not drop; work with light pressure. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) What is the advantage of ceramic? Ceramic works low in heat and splinter-free and is suitable for artificial-nail modelling (gel/acrylic); not for the natural nail – comfortable even during longer sessions. Can I autoclave the bit? Yes. This ceramic bit is autoclavable (121–134 °C); alternatively, clean it in an ultrasonic bath. Which devices does it fit? All Promed rotary tools with a standard collet (shaft Ø 2.35 mm). With the Promed Ceramic Bit (cone) you work low in heat and splinter-free for artificial-nail modelling (gel/acrylic); not for the natural nail.

Promed Ceramic Bit cone (198600) – for artificial nails only The Promed Ceramic Bit in a cone shape works especially low in heat and splinter-free. Ceramic generates considerably less heat during grinding than metal bits and is suitable for artificial-nail modelling (gel/acrylic); not for the natural nail. Fits all Promed rotary tools with a 2.35 mm collet. Key features at a glance Material: ceramic – low in heat and splinter-free. Shape: cone – for surfaces, edges and transitions. Application: artificial nail / gel (modelling) only; not for the natural nail. Shaft: dental size Ø 2.332–2.350 mm, for all Promed devices with a standard collet. Recommended speed: up to 30,000 rpm. Cleaning: autoclavable (121–134 °C) or in an ultrasonic bath. What is it used for and how? Artificial nail modelling: remove gel/acrylic material; not for the natural nail. Low in heat: ceramic heats up more slowly – comfortable during longer sessions. Tip: work at medium speed and with light pressure; do not drop ceramic bits. Technical data Article number198600 TypeCeramic bit, cone Materialceramic (low in heat, splinter-free) Shapecone Application areaartificial nail / gel (modelling); not for the natural nail ShaftØ 2.332–2.350 mm (dental size) Recommended speedup to 30,000 rpm Sterilisationautoclavable (121–134 °C) or ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesFits all Promed rotary tools with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, autoclave (121–134 °C) or clean in an ultrasonic bath (e. g. Promed UC-50 / UC-60). Ceramic is fragile – do not drop; work with light pressure. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) What is the advantage of ceramic? Ceramic works low in heat and splinter-free and is suitable for artificial-nail modelling (gel/acrylic); not for the natural nail – comfortable even during longer sessions. Can I autoclave the bit? Yes. This ceramic bit is autoclavable (121–134 °C); alternatively, clean it in an ultrasonic bath. Which devices does it fit? All Promed rotary tools with a standard collet (shaft Ø 2.35 mm). With the Promed Ceramic Bit (cone) you work low in heat and splinter-free on artificial-nail modelling (gel/acrylic); not for the natural nail.

Promed Ceramic Bit cone (198602) – for artificial nails only The Promed Ceramic Bit in a cone shape works especially low in heat and splinter-free. Ceramic generates considerably less heat during grinding than metal bits and is suitable for artificial-nail modelling (gel/acrylic); not for the natural nail. Fits all Promed rotary tools with a 2.35 mm collet. Key features at a glance Material: ceramic – low in heat and splinter-free. Shape: cone – for surfaces, edges and transitions. Application: artificial nail / gel (modelling) only; not for the natural nail. Shaft: dental size Ø 2.332–2.350 mm, for all Promed devices with a standard collet. Recommended speed: up to 30,000 rpm. Cleaning: autoclavable (121–134 °C) or in an ultrasonic bath. What is it used for and how? Artificial nail modelling: remove gel/acrylic material; not for the natural nail. Low in heat: ceramic heats up more slowly – comfortable during longer sessions. Tip: work at medium speed and with light pressure; do not drop ceramic bits. Technical data Article number198602 TypeCeramic bit, cone Materialceramic (low in heat, splinter-free) Shapecone Application areaartificial nail / gel (modelling); not for the natural nail ShaftØ 2.332–2.350 mm (dental size) Recommended speedup to 30,000 rpm Sterilisationautoclavable (121–134 °C) or ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesFits all Promed rotary tools with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, autoclave (121–134 °C) or clean in an ultrasonic bath (e. g. Promed UC-50 / UC-60). Ceramic is fragile – do not drop; work with light pressure. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) What is the advantage of ceramic? Ceramic works low in heat and splinter-free and is suitable for artificial-nail modelling (gel/acrylic); not for the natural nail – comfortable even during longer sessions. Can I autoclave the bit? Yes. This ceramic bit is autoclavable (121–134 °C); alternatively, clean it in an ultrasonic bath. Which devices does it fit? All Promed rotary tools with a standard collet (shaft Ø 2.35 mm). With the Promed Ceramic Bit (cone) you work low in heat and splinter-free on artificial-nail modelling (gel/acrylic); not for the natural nail.

Promed Ceramic Bit cone (198601) – for artificial nails only The Promed Ceramic Bit in a cone shape works especially low in heat and splinter-free. Ceramic generates considerably less heat during grinding than metal bits and is suitable for artificial-nail modelling (gel/acrylic); not for the natural nail. Fits all Promed rotary tools with a 2.35 mm collet. Key features at a glance Material: ceramic – low in heat and splinter-free. Shape: cone – for surfaces, edges and transitions. Application: artificial nail / gel (modelling) only; not for the natural nail. Shaft: dental size Ø 2.332–2.350 mm, for all Promed devices with a standard collet. Recommended speed: up to 30,000 rpm. Cleaning: autoclavable (121–134 °C) or in an ultrasonic bath. What is it used for and how? Artificial nail modelling: remove gel/acrylic material; not for the natural nail. Low in heat: ceramic heats up more slowly – comfortable during longer sessions. Tip: work at medium speed and with light pressure; do not drop ceramic bits. Technical data Article number198601 TypeCeramic bit, cone Materialceramic (low in heat, splinter-free) Shapecone Application areaartificial nail / gel (modelling); not for the natural nail ShaftØ 2.332–2.350 mm (dental size) Recommended speedup to 30,000 rpm Sterilisationautoclavable (121–134 °C) or ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesFits all Promed rotary tools with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, autoclave (121–134 °C) or clean in an ultrasonic bath (e. g. Promed UC-50 / UC-60). Ceramic is fragile – do not drop; work with light pressure. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) What is the advantage of ceramic? Ceramic works low in heat and splinter-free and is suitable for artificial-nail modelling (gel/acrylic); not for the natural nail – comfortable even during longer sessions. Can I autoclave the bit? Yes. This ceramic bit is autoclavable (121–134 °C); alternatively, clean it in an ultrasonic bath. Which devices does it fit? All Promed rotary tools with a standard collet (shaft Ø 2.35 mm). With the Promed Ceramic Bit (cone) you work low in heat and splinter-free on artificial-nail modelling (gel/acrylic); not for the natural nail.

Promed Ceramic Bit Cone (198607) – for artificial nails only The Promed Ceramic Bit in cone shape works particularly low in heat and splinter-free. When milling, ceramic generates significantly less heat than metal bits and is suitable for artificial-nail modelling (gel/acrylic); not for the natural nail. Fits all Promed nail drills with a 2.35 mm collet. Key features at a glance Material: Ceramic – low in heat and splinter-free. Shape: Cone – for surfaces, edges and transitions. Application: artificial nail / gel (modelling) only; not for the natural nail. Shank: Dental standard Ø 2.332–2.350 mm, fits all Promed devices with a standard collet. Recommended speed: up to 35,000 rpm. Cleaning: autoclavable (121–134 °C) or in an ultrasonic bath. What is it used for and how? Artificial nail modelling: remove gel/acrylic material; not for the natural nail. Low in heat: ceramic heats up more slowly – pleasant during longer treatments. Tip: work at medium speed and with light pressure; do not drop ceramic bits. Technical data Article number198607 TypeCeramic bit, cone MaterialCeramic (low in heat, splinter-free) ShapeCone Application areaartificial nail / gel (modelling); not for the natural nail ShankØ 2.332–2.350 mm (dental standard) Recommended speedup to 35,000 rpm Sterilisationautoclavable (121–134 °C) or ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesFits all Promed nail drills with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, autoclave (121–134 °C) or clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60). Ceramic is fragile – do not drop it; work with light pressure. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) What is the advantage of ceramic? Ceramic works low in heat and splinter-free and is suitable for artificial-nail modelling (gel/acrylic); not for the natural nail – pleasant even during longer treatments. Can I autoclave the bit? Yes. This ceramic bit is autoclavable (121–134 °C); alternatively, clean it in an ultrasonic bath. Which devices does it fit? All Promed nail drills with a standard collet (shank Ø 2.35 mm). With the Promed Ceramic Bit (cone), you work low in heat and splinter-free on artificial-nail modelling (gel/acrylic); not for the natural nail.

Promed Ceramic Bit Cone (198608) – for artificial nails only The Promed Ceramic Bit in cone shape works particularly low in heat and splinter-free. When milling, ceramic generates significantly less heat than metal bits and is suitable for artificial-nail modelling (gel/acrylic); not for the natural nail. Fits all Promed nail drills with a 2.35 mm collet. Key features at a glance Material: Ceramic – low in heat and splinter-free. Shape: Cone – for surfaces, edges and transitions. Application: artificial nail / gel (modelling) only; not for the natural nail. Shank: Dental standard Ø 2.332–2.350 mm, fits all Promed devices with a standard collet. Recommended speed: up to 35,000 rpm. Cleaning: autoclavable (121–134 °C) or in an ultrasonic bath. What is it used for and how? Artificial nail modelling: remove gel/acrylic material; not for the natural nail. Low in heat: ceramic heats up more slowly – pleasant during longer treatments. Tip: work at medium speed and with light pressure; do not drop ceramic bits. Technical data Article number198608 TypeCeramic bit, cone MaterialCeramic (low in heat, splinter-free) ShapeCone Application areaartificial nail / gel (modelling); not for the natural nail ShankØ 2.332–2.350 mm (dental standard) Recommended speedup to 35,000 rpm Sterilisationautoclavable (121–134 °C) or ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesFits all Promed nail drills with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, autoclave (121–134 °C) or clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60). Ceramic is fragile – do not drop it; work with light pressure. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) What is the advantage of ceramic? Ceramic works low in heat and splinter-free and is suitable for artificial-nail modelling (gel/acrylic); not for the natural nail – pleasant even during longer treatments. Can I autoclave the bit? Yes. This ceramic bit is autoclavable (121–134 °C); alternatively, clean it in an ultrasonic bath. Which devices does it fit? All Promed nail drills with a standard collet (shank Ø 2.35 mm). With the Promed Ceramic Bit (cone), you work low in heat and splinter-free for artificial-nail modelling (gel/acrylic); not for the natural nail.

Promed Ceramic Bit cylinder (198605) – for artificial nails only The Promed Ceramic Bit in a cylinder shape works especially low in heat and splinter-free. The cylindrical shape removes artificial nail and gel material (gel/acrylic) evenly across the surface; not for the natural nail. Ceramic generates considerably less heat during grinding than metal bits. Fits all Promed rotary tools with a 2.35 mm collet. Key features at a glance Material: ceramic – low in heat and splinter-free. Shape: cylinder – for even, flat removal. Application: artificial nail / gel (modelling) only; not for the natural nail. Shaft: dental size Ø 2.332–2.350 mm, for all Promed devices with a standard collet. Recommended speed: up to 20,000 rpm. Cleaning: autoclavable (121–134 °C) or in an ultrasonic bath. What is it used for and how? Flat removal: the cylinder shape removes larger surfaces evenly. Artificial nail modelling: reduce gel/acrylic material; not for the natural nail. Tip: work at medium speed and with light pressure; do not drop ceramic bits. Technical data Article number198605 TypeCeramic bit, cylinder Materialceramic (low in heat, splinter-free) Shapecylinder Application areaartificial nail / gel (modelling); not for the natural nail ShaftØ 2.332–2.350 mm (dental size) Recommended speedup to 20,000 rpm Sterilisationautoclavable (121–134 °C) or ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesFits all Promed rotary tools with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, autoclave (121–134 °C) or clean in an ultrasonic bath (e. g. Promed UC-50 / UC-60). Ceramic is fragile – do not drop; work with light pressure. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) What is the cylinder shape good for? The cylindrical shape removes larger surfaces evenly and is suitable for artificial nail modelling; not for the natural nail. Can I autoclave the bit? Yes. This ceramic bit is autoclavable (121–134 °C); alternatively, clean it in an ultrasonic bath. Which devices does it fit? All Promed rotary tools with a standard collet (shaft Ø 2.35 mm). With the Promed Ceramic Bit (cylinder) you remove artificial nail and gel material evenly, smoothly and low in heat; not for the natural nail.

Promed Ceramic Bit cylinder (198604) – for artificial nails only The Promed Ceramic Bit in a cylinder shape works especially low in heat and splinter-free. The cylindrical shape removes artificial nail and gel material (gel/acrylic) evenly across the surface; not for the natural nail. Ceramic generates considerably less heat during grinding than metal bits. Fits all Promed rotary tools with a 2.35 mm collet. Key features at a glance Material: ceramic – low in heat and splinter-free. Shape: cylinder – for even, flat removal. Application: artificial nail / gel (modelling) only; not for the natural nail. Shaft: dental size Ø 2.332–2.350 mm, for all Promed devices with a standard collet. Recommended speed: up to 20,000 rpm. Cleaning: autoclavable (121–134 °C) or in an ultrasonic bath. What is it used for and how? Flat removal: the cylinder shape removes larger surfaces evenly. Artificial nail modelling: reduce gel/acrylic material; not for the natural nail. Tip: work at medium speed and with light pressure; do not drop ceramic bits. Technical data Article number198604 TypeCeramic bit, cylinder Materialceramic (low in heat, splinter-free) Shapecylinder Application areaartificial nail / gel (modelling); not for the natural nail ShaftØ 2.332–2.350 mm (dental size) Recommended speedup to 20,000 rpm Sterilisationautoclavable (121–134 °C) or ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesFits all Promed rotary tools with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, autoclave (121–134 °C) or clean in an ultrasonic bath (e. g. Promed UC-50 / UC-60). Ceramic is fragile – do not drop; work with light pressure. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) What is the cylinder shape good for? The cylindrical shape removes larger surfaces evenly and is suitable for artificial nail modelling; not for the natural nail. Can I autoclave the bit? Yes. This ceramic bit is autoclavable (121–134 °C); alternatively, clean it in an ultrasonic bath. Which devices does it fit? All Promed rotary tools with a standard collet (shaft Ø 2.35 mm). With the Promed Ceramic Bit (cylinder) you remove artificial nail and gel material evenly, smoothly and low in heat; not for the natural nail.