PROMED UVL54-X
€99.95
Currently not available – expected to be back in stock in 4–6 weeks.
.webp?ts=1731329622)
Product information "PROMED UVL54-X"
Promed UVL-60-X – the powerful LED-UV curing lamp with battery – cordless or mains-powered
The Promed UVL-60-X is a powerful LED-UV curing lamp for gel, acrylic and TPO-free polishes on finger- and toenails. With its integrated 5,200 mAh battery it runs cordless – mains operation is always available too. 42 extra-large high-performance LEDs (365–405 nm) with gold contacts and mirror reflectors ensure reliable, fast curing. Auto-start via infrared sensors, 4 timer settings plus a high-power and a low-heat mode.
Your benefits at a glance
- Cordless curing: Integrated 5,200 mAh battery – work anywhere, mains operation always available.
- Maximum light output: 42 extra-large high-performance LEDs (365–405 nm) with gold contacts and mirror reflectors.
- For modern systems: Cures gel, acrylic and TPO-free polishes.
- Gentle or fast: High-power and low-heat modes, timer 10/30/60/90 s.
- Automatic sensor: Infrared sensors start curing automatically.
- Pedicure-ready: Removable magnetic base plate, sturdy carrying handle, mountable under the table.
Areas of application
- Curing gel, acrylic and TPO-free polishes: On finger- and toenails.
- Cordless working: Thanks to the battery, even where no power socket is within reach.
- Manicure and pedicure: Magnetic base plate removable for toenail application.
Using it is this easy
- Step 1 – Preparation: Before first use, charge the battery fully for at least 3 hours (only with the supplied power adapter).
- Step 2 – Switch on: Turn on the device; the display shows timer, battery level and mode.
- Step 3 – Curing: Insert your hand – auto-start via sensor, or select the timer (10/30/60/90 s) via button/touch. Low-heat mode for heat sensitivity, high power for fast curing.
- Step 4 – Pedicure: For toenails, remove the magnetic base plate.
Technical data
| Model / Article number | Promed UVL 60-X (223000) |
| Device type | LED-UV curing lamp with battery |
| LEDs | 42 high-performance LEDs, extra-large chips; gold contacts; mirror reflectors |
| Wavelength | 365–405 nm |
| Power | 36 W |
| Battery | Li-Ion 5,200 mAh, permanently integrated; initial charge at least 3 h, then 1–3 h |
| Timer | 10 s / 30 s / 60 s / 90 s |
| Modes | High Power / Low Heat |
| Sensor system | Automatic (infrared sensors) |
| Base plate | magnetic, removable (pedicure) |
| Power adapter | Input 100–240 V, 50/60 Hz; output 12.6 V DC / 2.8 A / 36 W |
| Dimensions / Weight | approx. 250 × 200 × 90 mm / approx. 1,240 g |
| Warranty | 24-month manufacturer's warranty |
Scope of delivery
- 1× Promed UVL 60-X LED-UV curing lamp
- 1× removable magnetic base plate
- 1× power cable/power adapter
- 1× instruction manual
Care and safety instructions
Please read the instruction manual carefully before first use.
- Do not look directly into the switched-on LEDs.
- If you have photosensitive skin/photosensitivity or take photosensitising medication, seek medical advice before use.
- Do not remove the battery: The battery is permanently integrated – do not open or dismantle the battery compartment.
- Operate only with the supplied power adapter (12.6 V / 2.8 A).
- Cleaning: Clean the housing and tunnel with a slightly damp cloth.
- Keep the ventilation slots clear, ensure adequate air circulation.
- If not used for a long time: Switch the device off and recharge the battery every 3 months (deep-discharge protection).
- Do not use in a damp environment (protection rating IP20); keep away from children.
Frequently asked questions (FAQ)
What sets the UVL 60-X apart from the UVL-54 All-In?
The UVL 60-X (art. 223000) has an integrated 5,200 mAh battery for cordless working and 42 extra-large high-performance LEDs with high-power and low-heat modes. The UVL-54 All-In (art. 223005) runs via power adapter, has 36 LEDs and likewise a magnetically removable base plate.
Which materials does the lamp cure?
The UVL 60-X cures gel, acrylic and TPO-free polishes. The wavelength range is 365–405 nm. For the optimal curing time, follow the recommendation of the respective gel manufacturer.
What does the low-heat mode do?
The low-heat mode reduces the sensation of heat during curing – pleasant for sensitive nails. For fast curing, the high-power mode is available.
How long does the battery last?
The integrated battery has a capacity of 5,200 mAh. The initial charge takes at least 3 hours, subsequent charges 1–3 hours. For longer storage we recommend recharging the battery every 3 months to prevent deep discharge.
Can I also use the UVL 60-X for pedicures?
Yes – the magnetic base plate can be removed so that toenails also fit comfortably into the light tunnel. The device can also be mounted under the table.
Why does the lamp also cure TPO-free polishes?
The 42 high-performance LEDs in the wavelength range 365–405 nm cover the spectrum that TPO-free (photoinitiator-free) nail polishes also need for curing – relevant, since classic TPO-containing products are increasingly restricted in the EU.
What warranty does Promed offer on the UVL 60-X?
Promed grants a manufacturer's warranty of 24 months from the date of purchase. All Promed devices are developed to strict quality standards and tested before dispatch.
Why Promed?
For over 40 years, Promed has stood for high-quality products for manicure and pedicure as well as medical and wellness applications. Our devices are developed to strict quality standards, are tested and certified, and are used worldwide by professionals and private customers alike.
Order the Promed UVL 60-X now – powerful LED-UV curing with battery, cordless or mains-powered.
Our products stand for top quality, durability, and innovative technology – developed and manufactured in Germany.
From entry-level devices to professional applications – Promed offers high-performance devices for every need and area of application.
We focus on fast, reliable customer service and continuous product improvement.