PROMED UVL-36s White

Promed UVL-36S white – the compact UV curing lamp for at-home nail design

The Promed UVL-36S white is a compact UV curing lamp using classic tube technology (UV fluorescent tubes, 365 nm) – ideal for at-home nail design and hobby use. In a stylish white design, with 36 W rated power and four pre-programmed timers for curing UV gel and acrylic. The practical way into UV light curing – for the studio and at home.

Your benefits at a glance

• Compact design: Space-saving in your home studio.
• Stylish white design: Modern and neutral.
• Four fixed timers: 90 seconds and 120 seconds for individual layers, 30 and 60 minutes for long cycles.
• Classic UV tube technology: 36 W rated power, 365 nm wavelength – cures classic UV gel and acrylic reliably.
• Pull-out hand rest: for comfortably resting your hand during curing.
• Ideal entry point: Just as suitable for professionals in the studio as for home and hobby use.

Areas of application

• At-home nail design: Your own nail art and nail extensions, comfortably at home.
• Hobby use: Occasional UV curing of gel and acrylic.
• Studio starter: An economical entry point for professionals in nail technology and nail design.
• Initial equipment: Getting started with classic UV light curing (365 nm).

How easy it is to use

1. Step 1 – First use: Pull the hand rest out of the guide rail, remove both transport locks, check that the tubes are seated correctly and reinsert the hand rest. Then plug in the mains cable (220–240 V).
2. Step 2 – Switching on: Press the on/off button – the power LED lights up red.
3. Step 3 – Selecting the timer: Set the operating time on the time selector switch (90 s / 120 s / 30 min / 60 min) – the timer starts automatically.
4. Step 4 – Curing: Place the hand with the prepared gel nail inside and wait for the cycle to finish. After use, switch off, unplug the mains cable and only touch the tubes once they have cooled down.

Technical data

Scope of delivery

• 1× Promed UVL-36S (UV tubes pre-installed), housing colour white (330040) or pink (330045)
• 1× pull-out hand rest (already fitted in the device, incl. transport locks)
• 1× instruction manual

Care and safety information

• UV radiation can damage the eyes and skin – protective goggles are strongly recommended, never look into the tubes.
• People with UV sensitivity, skin conditions or taking photosensitising medication should avoid UV exposure or seek medical advice beforehand.
• Keep a minimum distance of 20 mm from the tube; do not touch hot tubes (risk of burns).
• Maximum 10 minutes of exposure per session, followed by at least a 30-minute break; no more than approx. 200 applications per year.
• Cleaning: Clean the housing only with a slightly damp cloth, keep the ventilation slots clear.
• Operate only on a 220–240 V socket; do not use in a damp environment.
• Use only original replacement tubes (type UV-9W-L).

Frequently asked questions (FAQ)

Why Promed?

For over 40 years, Promed has stood for high-quality products for manicure and pedicure as well as medical and wellness applications. Our devices are developed to strict quality standards, are tested and certified and used all over the world.

Order the Promed UVL-36S now – the practical way into classic UV light curing.