Stone and Sandpaper Grinders

Promed Sanding Band ZEBRA coarse, 100 pieces (198592) – single-use slip-on sleeves for natural nails and calluses The Promed Sanding Bands ZEBRA in the coarse grit are single-use slip-on sleeves for working on natural nails and calluses. The ZEBRA version is recognisable by its characteristic striped pattern; the coarse grit is suitable for the vigorous removal of pronounced calluses and thicker areas of the nail. The bands are slipped onto a Promed sanding mandrel and are changed after use for hygiene reasons. For all Promed rotary tools with a 2.35 mm collet. Key features at a glance Version: ZEBRA – characteristic striped pattern. Grit: coarse – vigorous removal of pronounced calluses and thicker areas of the nail. Type: single-use slip-on sleeve – changed for hygiene reasons. Pack size: 100 pieces. Application: natural nails and skin/calluses. Recommended speed: approx. 4,000–15,000 rpm. Cleaning: single-use / hygiene change; not autoclavable. Compatible accessories: Promed sanding mandrel as carrier (e. g. 198564, 198565/L, 198583, 198580, 198581). What are they used for and how? Slipping on: push the sanding band onto the Promed sanding mandrel until it sits securely. Working: remove pronounced calluses or thicker areas of the nail with light pressure in thin layers – never radically. Changing: pull off the band after use and dispose of it; slip on a fresh one for the next treatment. Technical data Article number198592 TypeSanding band ZEBRA (single-use slip-on sleeve) Gritcoarse Pack size100 pieces Application areanatural nails, skin/calluses Recommended speedapprox. 4,000–15,000 rpm Sterilisationsingle-use / hygiene change; not autoclavable CompatibilityPromed sanding mandrel; all Promed devices with a 2.35 mm collet Compatible accessoriesThe sanding bands are slipped onto a Promed sanding mandrel (e. g. plastic 198564, plastic long 198565/L, metal autoclavable 198583 or rubber 198580 / 198581). The mandrel fits all Promed rotary tools with a standard collet (2.35 mm). Care and safety instructions Sanding bands are single-use items: change after use for hygiene reasons, do not autoclave. Work with light pressure; never remove calluses radically. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) What does ZEBRA mean? ZEBRA refers to the version of the sanding bands with a characteristic striped pattern. Function and application are the same as for the other sanding bands. What is the coarse grit intended for? For the vigorous removal of pronounced calluses and thicker areas of the nail. For finer reworking, then switch to ZEBRA medium (198591) or ZEBRA fine (198590). With the coarse Promed Sanding Bands ZEBRA you vigorously remove pronounced calluses – hygienically with a fresh sleeve for every treatment.

Promed Sanding Band ZEBRA fine, 100 pieces (198590) – single-use slip-on sleeves for natural nail and calluses The Promed Sanding Bands ZEBRA in fine grit are single-use slip-on sleeves for working on the natural nail and calluses. The ZEBRA version is recognisable by its characteristic striped pattern; the fine grit is suited for gentle smoothing and finer finishing. The bands are fitted onto a Promed sanding mandrel and replaced after use for hygiene reasons. For all Promed rotary tools with a 2.35 mm collet. Key features at a glance Version: ZEBRA – characteristic striped pattern. Grit: fine – gentle smoothing and fine finishing. Type: single-use slip-on sleeve – replace for hygiene reasons. Pack size: 100 pieces. Application: natural nail and skin/calluses. Recommended speed: approx. 4,000–15,000 rpm. Cleaning: single-use / hygiene replacement; not autoclavable. Compatible accessories: Promed sanding mandrel as carrier (e.g. 198564, 198565/L, 198583, 198580, 198581). What are they used for and how? Fitting: slide the sanding band onto the Promed sanding mandrel until it sits securely. Working: finely work the natural nail or calluses with light pressure – never aggressively, but in thin layers. Replacing: pull off and dispose of the band after use; fit a fresh one for the next treatment. Technical data Article number198590 TypeSanding band ZEBRA (single-use slip-on sleeve) Gritfine Pack size100 pieces Application areanatural nail, skin/calluses Recommended speedapprox. 4,000–15,000 rpm Sterilisationsingle-use / hygiene replacement; not autoclavable CompatibilityPromed sanding mandrel; all Promed devices with a 2.35 mm collet Compatible accessoriesThe sanding bands are fitted onto a Promed sanding mandrel (e.g. plastic 198564, plastic long 198565/L, metal autoclavable 198583 or rubber 198580 / 198581). The mandrel fits all Promed rotary tools with a standard collet (2.35 mm). Care and safety instructions Sanding bands are single-use items: replace after use for hygiene reasons, do not autoclave. Work with light pressure; never remove calluses aggressively. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) What does ZEBRA mean? ZEBRA refers to the version of the sanding bands with a characteristic striped pattern. Function and application correspond to the other sanding bands. Do I need a mandrel as well? Yes. The sanding bands are fitted onto a Promed sanding mandrel (available separately). They cannot be used without a mandrel. With the fine Promed Sanding Bands ZEBRA you smooth the natural nail and calluses hygienically with a fresh sleeve for every treatment.

Promed Sanding Band ZEBRA medium, 100 pieces (198591) – single-use slip-on sleeves for natural nail and calluses The Promed Sanding Bands ZEBRA in medium grit are single-use slip-on sleeves for working on the natural nail and calluses. The ZEBRA version is recognisable by its characteristic striped pattern; the medium grit is the versatile all-rounder for quick material removal. The bands are fitted onto a Promed sanding mandrel and replaced after use for hygiene reasons. For all Promed rotary tools with a 2.35 mm collet. Key features at a glance Version: ZEBRA – characteristic striped pattern. Grit: medium – versatile all-rounder for quick material removal. Type: single-use slip-on sleeve – replace for hygiene reasons. Pack size: 100 pieces. Application: natural nail and skin/calluses. Recommended speed: approx. 4,000–15,000 rpm. Cleaning: single-use / hygiene replacement; not autoclavable. Compatible accessories: Promed sanding mandrel as carrier (e.g. 198564, 198565/L, 198583, 198580, 198581). What are they used for and how? Fitting: slide the sanding band onto the Promed sanding mandrel until it sits securely. Working: work the natural nail or calluses with light pressure – never aggressively, but in thin layers. Replacing: pull off and dispose of the band after use; fit a fresh one for the next treatment. Technical data Article number198591 TypeSanding band ZEBRA (single-use slip-on sleeve) Gritmedium Pack size100 pieces Application areanatural nail, skin/calluses Recommended speedapprox. 4,000–15,000 rpm Sterilisationsingle-use / hygiene replacement; not autoclavable CompatibilityPromed sanding mandrel; all Promed devices with a 2.35 mm collet Compatible accessoriesThe sanding bands are fitted onto a Promed sanding mandrel (e.g. plastic 198564, plastic long 198565/L, metal autoclavable 198583 or rubber 198580 / 198581). The mandrel fits all Promed rotary tools with a standard collet (2.35 mm). Care and safety instructions Sanding bands are single-use items: replace after use for hygiene reasons, do not autoclave. Work with light pressure; never remove calluses aggressively. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) What does ZEBRA mean? ZEBRA refers to the version of the sanding bands with a characteristic striped pattern. Function and application correspond to the other sanding bands. Which grit should I choose? The medium grit is the all-rounder for quick material removal. For finer smoothing choose ZEBRA fine (198590), for coarser removal ZEBRA coarse (198592). With the medium Promed Sanding Bands ZEBRA you work the natural nail and calluses versatilely – hygienically with a fresh sleeve for every treatment.

Promed Sanding Band coarse, 100 pieces (198563) – single-use slip-on sleeves for natural nails and calluses The Promed Sanding Bands in a coarse grit are single-use slip-on sleeves for working on natural nails and calluses. The coarse grit is suitable for the vigorous removal of pronounced calluses and thicker areas of the nail. The bands are pushed onto a Promed sanding mandrel and changed after use for hygiene reasons. For all Promed nail drills with a 2.35 mm collet. Key features at a glance Grit: coarse – vigorous removal of pronounced calluses and thicker areas of the nail. Design: single-use slip-on sleeve – changed for hygiene reasons. Pack size: 100 pieces. Application: Natural nail and skin/calluses. Recommended speed: runs with the carrier mandrel (rubber up to 15,000 / metal up to 25,000 rpm). Cleaning: single-use / hygiene change; not autoclavable. Compatible accessories: Promed sanding mandrel as carrier (e.g. 198564, 198565/L, 198583, 198580, 198581). What are they used for and how? Attaching: slide the sanding band onto the Promed sanding mandrel until it sits securely. Working: remove pronounced calluses or thicker areas of the nail with light pressure in thin layers – never aggressively. Changing: pull off the band after use and dispose of it; put on a fresh one for the next treatment. Technical data Article number198563 TypeSanding band (single-use slip-on sleeve) Gritcoarse Pack size100 pieces Application areaNatural nail, skin/calluses Recommended speedruns with the carrier mandrel (rubber up to 15,000 / metal up to 25,000 rpm) Sterilisationsingle-use / hygiene change; not autoclavable CompatibilityPromed sanding mandrel; all Promed devices with a 2.35 mm collet Compatible accessoriesThe sanding bands are pushed onto a Promed sanding mandrel (e.g. plastic 198564, plastic long 198565/L, metal autoclavable 198583 or rubber 198580 / 198581). The mandrel fits all Promed nail drills with a standard collet (2.35 mm). Care and safety instructions Sanding bands are single-use items: change them after use for hygiene reasons, do not autoclave. Work with light pressure; never remove calluses aggressively. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) What is the coarse grit intended for? For the vigorous removal of pronounced calluses and thicker areas of the nail. For finer finishing, switch to medium (198562) or fine (198561) afterwards. Do I need a mandrel for them? Yes. The sanding bands are pushed onto a Promed sanding mandrel (available separately). Without a mandrel they cannot be used. With the coarse Promed Sanding Bands, you vigorously remove pronounced calluses – hygienically with a fresh sleeve for every treatment.

Promed Sanding Band fine, 100 pieces (198561) – single-use slip-on sleeves for natural nails and calluses The Promed Sanding Bands in a fine grit are single-use slip-on sleeves for working on natural nails and calluses. The fine grit is suitable for gentle smoothing and finer finishing. The bands are pushed onto a Promed sanding mandrel and changed after use for hygiene reasons. For all Promed nail drills with a 2.35 mm collet. Key features at a glance Grit: fine – gentle smoothing and fine finishing. Design: single-use slip-on sleeve – changed for hygiene reasons. Pack size: 100 pieces. Application: Natural nail and skin/calluses. Recommended speed: runs with the carrier mandrel (rubber up to 15,000 / metal up to 25,000 rpm). Cleaning: single-use / hygiene change; not autoclavable. Compatible accessories: Promed sanding mandrel as carrier (e.g. 198564, 198565/L, 198583, 198580, 198581). What are they used for and how? Attaching: slide the sanding band onto the Promed sanding mandrel until it sits securely. Working: finely work on the natural nail or calluses with light pressure – never aggressively, but in thin layers. Changing: pull off the band after use and dispose of it; put on a fresh one for the next treatment. Technical data Article number198561 TypeSanding band (single-use slip-on sleeve) Gritfine Pack size100 pieces Application areaNatural nail, skin/calluses Recommended speedruns with the carrier mandrel (rubber up to 15,000 / metal up to 25,000 rpm) Sterilisationsingle-use / hygiene change; not autoclavable CompatibilityPromed sanding mandrel; all Promed devices with a 2.35 mm collet Compatible accessoriesThe sanding bands are pushed onto a Promed sanding mandrel (e.g. plastic 198564, plastic long 198565/L, metal autoclavable 198583 or rubber 198580 / 198581). The mandrel fits all Promed nail drills with a standard collet (2.35 mm). Care and safety instructions Sanding bands are single-use items: change them after use for hygiene reasons, do not autoclave. Work with light pressure; never remove calluses aggressively. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) Do I need a mandrel for them? Yes. The sanding bands are pushed onto a Promed sanding mandrel (available separately). Without a mandrel they cannot be used. Can I use the bands more than once? Sanding bands are single-use hygiene items and are changed after use. They are not autoclavable. The pack of 100 is enough for many applications. With the fine Promed Sanding Bands, you smooth natural nails and calluses hygienically with a fresh sleeve for every treatment.

Promed Sanding Band medium, 100 pieces (198562) – single-use slip-on sleeves for natural nails and calluses The Promed Sanding Bands in a medium grit are single-use slip-on sleeves for working on natural nails and calluses. The medium grit is the versatile all-rounder for quick removal and preparing finer steps. The bands are pushed onto a Promed sanding mandrel and changed after use for hygiene reasons. For all Promed nail drills with a 2.35 mm collet. Key features at a glance Grit: medium – versatile all-rounder for quick removal. Design: single-use slip-on sleeve – changed for hygiene reasons. Pack size: 100 pieces. Application: Natural nail and skin/calluses. Recommended speed: runs with the carrier mandrel (rubber up to 15,000 / metal up to 25,000 rpm). Cleaning: single-use / hygiene change; not autoclavable. Compatible accessories: Promed sanding mandrel as carrier (e.g. 198564, 198565/L, 198583, 198580, 198581). What are they used for and how? Attaching: slide the sanding band onto the Promed sanding mandrel until it sits securely. Working: work on the natural nail or calluses with light pressure – never aggressively, but in thin layers. Changing: pull off the band after use and dispose of it; put on a fresh one for the next treatment. Technical data Article number198562 TypeSanding band (single-use slip-on sleeve) Gritmedium Pack size100 pieces Application areaNatural nail, skin/calluses Recommended speedruns with the carrier mandrel (rubber up to 15,000 / metal up to 25,000 rpm) Sterilisationsingle-use / hygiene change; not autoclavable CompatibilityPromed sanding mandrel; all Promed devices with a 2.35 mm collet Compatible accessoriesThe sanding bands are pushed onto a Promed sanding mandrel (e.g. plastic 198564, plastic long 198565/L, metal autoclavable 198583 or rubber 198580 / 198581). The mandrel fits all Promed nail drills with a standard collet (2.35 mm). Care and safety instructions Sanding bands are single-use items: change them after use for hygiene reasons, do not autoclave. Work with light pressure; never remove calluses aggressively. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) Do I need a mandrel for them? Yes. The sanding bands are pushed onto a Promed sanding mandrel (available separately). Without a mandrel they cannot be used. Which grit should I choose? The medium grit is the all-rounder for quick removal. For finer smoothing choose fine (198561), for coarser removal choose coarse (198563). With the medium Promed Sanding Bands, you work on natural nails and calluses versatilely – hygienically with a fresh sleeve for every treatment.

Promed Sanding Mandrel, plastic (198564) – carrier for sanding bands and sandpaper caps The Promed sanding mandrel made of plastic is the holder (carrier) onto which you slip Promed sanding bands or sandpaper caps. Once the sanding band or cap is worn, simply pull it off and slip on a new one – the mandrel stays in use. Fits all Promed nail drill devices with a 2.35 mm collet. Key features at a glance Material: plastic. Function: carrier/holder for slipping on sanding bands and sandpaper caps. Shaft: dental size Ø 2.332–2.350 mm, suitable for all Promed devices with a standard collet. Cleaning: in an ultrasonic bath; not autoclavable. Compatible accessories: Promed sanding bands and sandpaper caps (available separately). What is it used for and how? Slipping on: push the sanding band or sandpaper cap onto the mandrel until it sits securely. Working: treat calluses or the natural nail as you would with the respective sanding band/cap. Changing: pull off the worn sanding band/cap and slip on a new one – replace regularly for hygiene reasons. Technical data Article number198564 Typesanding mandrel (carrier/holder) Materialplastic Functioncarrier for sanding bands / sandpaper caps ShaftØ 2.332–2.350 mm (dental size) Sterilisationnot autoclavable; ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe mandrel fits all Promed nail drill devices with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60); do not autoclave (plastic, heat-sensitive). Change the sanding band/cap regularly for hygiene reasons. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) What do I need the mandrel for? The mandrel is the carrier onto which you slip sanding bands or sandpaper caps. Without a mandrel, bands and caps cannot be used. Can I autoclave the mandrel? No. The plastic mandrel is not autoclavable – clean it in an ultrasonic bath. An autoclavable carrier is available as the metal mandrel (198583). With the Promed plastic sanding mandrel you use sanding bands and sandpaper caps economically – simply slip them on and replace them once worn.

Promed Sanding Mandrel, rubber 10×15 mm (198581) – carrier for sanding bands and sandpaper caps The Promed sanding mandrel made of rubber in size 10×15 mm is a holder (carrier) onto which you slip Promed sanding bands or sandpaper caps. The elastic rubber core adapts to the contour and ensures a secure, flexible fit of the slip-on sleeve – the more compact version is well suited for precise work on smaller areas. Once the sanding band or cap is worn, pull it off and slip on a new one. Fits all Promed nail drill devices with a 2.35 mm collet. Key features at a glance Material: rubber – elastic, for a flexible fit of the slip-on sleeve. Size: 10×15 mm – compact version for precise work. Function: carrier/holder for slipping on sanding bands and sandpaper caps. Shaft: dental size Ø 2.332–2.350 mm, fits all Promed devices with a standard collet. Max. speed: up to 15,000 rpm. Cleaning: in an ultrasonic bath; not autoclavable. Compatible accessories: Promed sanding bands and sandpaper caps (available separately). What is it used for and how? Slipping on: push the sanding band or sandpaper cap onto the rubber mandrel until it sits securely. Working: treat calluses or the natural nail precisely – the rubber core adapts to the contour. Changing: pull off the worn sanding band/cap and slip on a new one – replace regularly for hygiene reasons. Technical data Article number198581 TypeSanding mandrel (carrier/holder) MaterialRubber Size10×15 mm FunctionCarrier for sanding bands / sandpaper caps ShaftØ 2.332–2.350 mm (dental size) Max. speedup to 15,000 rpm Sterilisationnot autoclavable; ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe mandrel fits all Promed nail drill devices with a standard collet (2.35 mm), including the Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, clean in an ultrasonic bath (e. g. Promed UC-50 / UC-60); do not autoclave (rubber, heat-sensitive). Replace the sanding band/cap regularly for hygiene reasons. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) What is the difference between the rubber mandrels 10×15 and 13×19 mm? Both work the same way. The 10×15 mm mandrel (198581) is more compact and suited for precise work on smaller areas, while the 13×19 mm mandrel (198580) offers more surface for working over larger areas. Can I autoclave the mandrel? No. The rubber mandrel is not autoclavable – clean it in an ultrasonic bath. An autoclavable carrier is available as the metal mandrel (198583). With the Promed sanding mandrel rubber 10×15 mm you have a flexible carrier for precise work with sanding bands and sandpaper caps.

Promed Sanding Mandrel, rubber 13×19 mm (198580) – carrier for sanding bands and sandpaper caps The Promed sanding mandrel made of rubber in size 13×19 mm is a holder (carrier) onto which you slip Promed sanding bands or sandpaper caps. The elastic rubber core adapts to the contour and ensures a secure, flexible fit of the slip-on sleeve – the larger version is well suited for working over larger areas. Once the sanding band or cap is worn, pull it off and slip on a new one. Fits all Promed nail drill devices with a 2.35 mm collet. Key features at a glance Material: rubber – elastic, for a flexible fit of the slip-on sleeve. Size: 13×19 mm – larger version for working over larger areas. Function: carrier/holder for slipping on sanding bands and sandpaper caps. Shaft: dental size Ø 2.332–2.350 mm, fits all Promed devices with a standard collet. Max. speed: up to 15,000 rpm. Cleaning: in an ultrasonic bath; not autoclavable. Compatible accessories: Promed sanding bands and sandpaper caps (available separately). What is it used for and how? Slipping on: push the sanding band or sandpaper cap onto the rubber mandrel until it sits securely. Working: treat calluses or the natural nail – the rubber core adapts to the contour. Changing: pull off the worn sanding band/cap and slip on a new one – replace regularly for hygiene reasons. Technical data Article number198580 TypeSanding mandrel (carrier/holder) MaterialRubber Size13×19 mm FunctionCarrier for sanding bands / sandpaper caps ShaftØ 2.332–2.350 mm (dental size) Max. speedup to 15,000 rpm Sterilisationnot autoclavable; ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe mandrel fits all Promed nail drill devices with a standard collet (2.35 mm), including the Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, clean in an ultrasonic bath (e. g. Promed UC-50 / UC-60); do not autoclave (rubber, heat-sensitive). Replace the sanding band/cap regularly for hygiene reasons. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) What is the advantage of a rubber mandrel? The elastic rubber core adapts to the contour and ensures a secure, flexible fit of the slip-on sleeve. The 13×19 mm size is well suited for working over larger areas. Can I autoclave the mandrel? No. The rubber mandrel is not autoclavable – clean it in an ultrasonic bath. An autoclavable carrier is available as the metal mandrel (198583). With the Promed sanding mandrel rubber 13×19 mm you have a flexible carrier for working over larger areas with sanding bands and sandpaper caps.

Promed Stone Grinder, Standard (198535) – for natural nails and calluses The Promed Stone Grinder in a standard shape is a robust, versatile grinding body for removing calluses and working on the natural nail. The rounded standard shape is a good all-rounder for surfaces and transitions. Fits all Promed nail drills with a 2.35 mm collet. Key features at a glance Type: Stone grinder – robust, long-lasting grinding body. Shape: Standard – versatile all-rounder for surfaces and transitions. Application: Natural nail and skin/calluses. Shank: Dental standard Ø 2.332–2.350 mm, fits all Promed devices with a standard collet. Recommended speed: up to 12,000 rpm. Cleaning: in an ultrasonic bath; autoclavable (121–134 °C). What is it used for and how?The standard-shaped stone grinder is suitable for regularly removing calluses and working on the natural nail on hands and feet: Calluses: remove over a wide area at low to medium speed with light pressure – regularly in thin layers rather than aggressively. Natural nail: work on the nail surface and edges evenly and shape them. Tip: reduce the speed if it heats up and lift the bit off briefly. Technical data Article number198535 TypeStone grinder, standard Application areaNatural nail, skin/calluses ShankØ 2.332–2.350 mm (dental standard) Recommended speedup to 12,000 rpm Sterilisationautoclavable (121–134 °C); ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe stone grinder fits all Promed nail drills with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions Clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60) after use; autoclavable at 121–134 °C. Work with light pressure; never remove calluses aggressively. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) Which devices does the stone grinder fit? All Promed nail drills with a standard collet (shank Ø 2.35 mm). Can I autoclave the bit? Yes. This stone grinder is autoclavable (121–134 °C). In addition, cleaning in an ultrasonic bath is recommended. How does the standard shape differ from the cylinder shape? The standard shape is a versatile all-rounder for surfaces and transitions, whereas the cylinder works particularly over a wide area on straight edges. With the Promed Stone Grinder Standard, you work on natural nails and calluses versatilely and durably.

Promed Stone Grinder, Cylinder (198530) – for natural nails and calluses The Promed Stone Grinder in a cylinder shape is a robust grinding body for evenly removing calluses and working on the natural nail. The cylindrical shape works over a wide area and is well suited to edges and straight transitions. Fits all Promed nail drills with a 2.35 mm collet. Key features at a glance Type: Stone grinder – robust, long-lasting grinding body. Shape: Cylinder – wide-area work on straight transitions and edges. Application: Natural nail and skin/calluses. Shank: Dental standard Ø 2.332–2.350 mm, fits all Promed devices with a standard collet. Recommended speed: up to 12,000 rpm. Cleaning: in an ultrasonic bath; autoclavable (121–134 °C). What is it used for and how?The cylinder-shaped stone grinder is suitable for regularly removing calluses and working on the natural nail on hands and feet: Calluses: remove over a wide area at low to medium speed with light pressure – regularly in thin layers rather than aggressively. Natural nail: work on the nail surface and edges evenly and shape them. Tip: reduce the speed if it heats up and lift the bit off briefly. Technical data Article number198530 TypeStone grinder, cylinder Application areaNatural nail, skin/calluses ShankØ 2.332–2.350 mm (dental standard) Recommended speedup to 12,000 rpm Sterilisationautoclavable (121–134 °C); ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe stone grinder fits all Promed nail drills with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions Clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60) after use; autoclavable at 121–134 °C. Work with light pressure; never remove calluses aggressively. If you have diabetes or circulatory problems, consult a doctor before use. Frequently asked questions (FAQ) Which devices does the stone grinder fit? All Promed nail drills with a standard collet (shank Ø 2.35 mm). Can I autoclave the bit? Yes. This stone grinder is autoclavable (121–134 °C). In addition, cleaning in an ultrasonic bath is recommended. What is the cylinder shape suitable for? The cylinder shape works over a wide area and is ideal for straight transitions, edges and evenly working on natural nails and calluses. With the cylinder-shaped Promed Stone Grinder, you work on natural nails and calluses evenly and durably.