Electrodes and Accessories

Carbon permanent electrodes self adhesive4 pcs./pack 40 x 40 mm for all promed tens/ems units

to renew the used up gel on the electrodes also appropriated for Carbonpermanet electrodes; self-adhesive, 40x40mm, 10 pieces

Promed TENS/EMS electrode Butterfly 150×95 mm – large-area fabric electrodeThe Promed TENS/EMS electrode Butterfly (150×95 mm) is a self-adhesive replacement and consumable electrode in a butterfly shape for large-area, anatomical TENS and EMS application with all Promed electrotherapy devices. Thanks to its snap connector (2 mm), it fits the TENS-1000s, EMT-4, EMT-6 and IT-6 as well as many third-party devices with the same connector. The anatomical butterfly shape (15×9.5 cm) fits ideally onto large-area regions such as the lower back or lumbar area. Gentle on the skin, reusable and for personal use. Pack size: 2 pcs. Your benefits at a glance Large-area butterfly shape 150×95 mm: anatomically shaped for large regions such as the lower back and lumbar area. Suitable for all Promed TENS/EMS devices: 2 mm snap connector for the TENS-1000s, EMT-4, EMT-6 and IT-6. One electrode for large areas: covers a broad region in a single step – pack size 2 pcs. Reusable multiple times: depending on skin type, hair, care and storage typically approx. 15–30 applications, until adhesion and conductivity decline. Skin-friendly & hygienic: Self-adhesive fabric with conductive hydrogel, for personal use. Part of a system: also available in several standard sizes as well as a neck shape. Areas of use – what is the butterfly electrode suitable for?The Promed fabric electrodes are the consumable material for TENS and EMS electrostimulation. The electrode is positioned so that the current frames the area to be treated – the large-area butterfly shape covers broad, anatomically shaped regions: For TENS pain therapy: consumable material for drug-free TENS application with your Promed electrotherapy device, especially for large-area complaints in the lower back or lumbar area. For EMS muscle stimulation: consumable material for EMS application with your Promed device (muscle stimulation and relaxation of tense muscles). Large-area, anatomical application: The butterfly shape fits precisely onto large, curved body regions. Other shapes: For targeted or smaller areas there are the standard sizes, and for the neck/shoulder region the neck electrode. How easy it is to use Step 1 – Prepare the skin: Clean the area of skin thoroughly and dry it completely – no oil and no lotion. Step 2 – Apply the electrode: Peel off the protective film and press the electrode down from the centre outwards. Step 3 – Connect & treat: Connect the cable (available separately) to the electrode and the device, switch the device on and increase the intensity slowly. Step 4 – After use: Switch the device off, disconnect the cable, peel off the electrode in the direction of hair growth and stick it back onto the protective film. Store cool and dry. Technical data ProductPromed TENS/EMS electrode Butterfly 150×95 mm (self-adhesive) Shape / sizeButterfly, large-area anatomical Dimensions150×95 mm (15×9.5 cm) Article number359173 Materialfabric carrier material with conductive hydrogel Connectorsnap connector 2 mm Pack size2 pcs Propertiesself-adhesive, reusable, for personal use CompatibilityPromed TENS-1000s, EMT-4, EMT-6, IT-6 as well as third-party devices with 2 mm snap Service lifetypically approx. 15–30 applications, depending on skin type, hair, care and storage Scope of delivery 2× Promed TENS/EMS electrode Butterfly 150×95 mm (15×9.5 cm) 1× insert Cable not included (available separately) Care and safety informationPlease read the instructions for use of your TENS/EMS device carefully before first use. Never rinse the electrodes under running water – this destroys the hydrogel. If the adhesion weakens, it is enough to dab a single drop of water onto the adhesive surface. Alternatively, the Promed contact gel (Art. 359910) ensures better adhesion and conductivity. Do not place the electrodes over wounds, inflammation or irritated skin. Do not use in the area of the heart, larynx, eyes or over metal implants. Wearers of pacemakers or other electrical implants may only use TENS/EMS electrodes after consulting a doctor. In the case of pregnancy, epilepsy or unexplained pain, consult a doctor before use. With sensitive skin, carry out a skin-tolerance test on a small area before first use. Use for personal purposes only; after use, stick the electrodes back onto the protective film and store them cool and dry. Frequently asked questions (FAQ) Which body regions is the butterfly electrode suitable for? The large-area butterfly shape (150×95 mm) is particularly suited to large, anatomically shaped regions such as the lower back or lumbar area. For targeted or smaller areas there are the round 32 mm electrodes (Art. 359177), 45×35 mm (Art. 359172), 45×45 mm (Art. 359171) and 45×80 mm (Art. 359178). For the neck/shoulder region, the neck electrode (Art. 359174) is available. Which devices is the electrode compatible with? Thanks to the 2 mm snap connector, the electrode fits all Promed electrotherapy devices: the TENS-1000s (Art. 352020), EMT-4 (Art. 352410), EMT-6 (Art. 352420) and IT-6 (Art. 352430). Many third-party devices with a 2 mm snap are also compatible – some third-party devices use a 2.5 mm pin, so check the connector type beforehand. The matching contact cables are available separately. How often can I reuse the electrode? Depending on skin type, hair, care and storage, the electrodes typically last for approx. 15–30 applications. Replace the electrodes when the adhesion weakens, when discolouration or cracks appear, or when the gel surface dries out. How do I clean and store the electrode correctly? Do not clean the electrodes themselves, but rather the area of skin before each application. Never rinse the adhesive surface under running water – if the adhesion weakens, a single drop of water is enough to refresh it. After use, stick the electrodes back onto the protective film and store them cool and dry. Can I use the electrode with several people? No. For hygiene reasons, the fabric electrodes are for personal use and should be used by one person only. Are cables included in the scope of delivery? No, the contact cables are available separately – the matching Promed contact cable depending on your device. If the adhesion weakens, we additionally recommend the Promed contact gel (Art. 359910). Why Promed?For over 40 years, Promed has stood for premium products for manicure and pedicure as well as medical and wellness applications. Our devices and accessories are developed to strict quality standards, are tested and certified and are used worldwide by professionals and private customers – put your trust in Promed quality too. Order the Promed TENS/EMS electrode Butterfly 150×95 mm now – for gentle, effective TENS/EMS application on large areas.

Promed TENS/EMS electrodes Ø 32 mm – self-adhesive round fabric electrodes for targeted applicationThe Promed TENS/EMS electrodes Ø 32 mm are self-adhesive replacement and consumable electrodes for TENS and EMS application with all Promed electrotherapy devices. The round shape is particularly suitable for targeted application on small, precise points such as joints or trigger points. Thanks to their snap connector (2 mm), they fit the TENS-1000s, EMT-4, EMT-6 and IT-6 as well as many third-party devices with the same connector. Gentle on the skin, reusable and for personal use. Other sizes and shapes are available separately. Your benefits at a glance Suitable for all Promed TENS/EMS devices: 2 mm snap connector for the TENS-1000s, EMT-4, EMT-6 and IT-6. Round shape for points: Ø 32 mm for targeted application on joints, trigger points or small precise spots. 4 electrodes per pack: ideal for 2-channel operation (two pairs of electrodes). Reusable multiple times: depending on skin type, hair, care and storage typically approx. 15–30 applications, until adhesion and conductivity decline. Skin-friendly & hygienic: Self-adhesive fabric with conductive hydrogel, for personal use. Areas of use – what are the round 32 mm electrodes suitable for?The Promed fabric electrodes are the consumable material for TENS and EMS electrostimulation. The electrodes are positioned so that the current frames the area to be treated: For TENS pain therapy: consumable material for drug-free TENS application with your Promed electrotherapy device (e.g. for joint or trigger-point complaints). For EMS muscle stimulation: consumable material for EMS application with your Promed device (muscle stimulation and relaxation of tense muscles). Ideal for targeted application: the round Ø 32 mm are suitable for small, precise points such as joints, trigger points or fingers. Other sizes & shapes: for smaller, medium or large-area regions, separate sizes as well as butterfly and neck shapes are available. How easy it is to use Step 1 – Prepare the skin: Clean the area of skin thoroughly and dry it completely – no oil and no lotion. Step 2 – Apply the electrode: Peel off the protective film and press the electrode down from the centre outwards. Step 3 – Connect & treat: Connect the cable (available separately) to the electrode and the device, switch the device on and increase the intensity slowly. Step 4 – After use: Switch the device off, disconnect the cable, peel off the electrode in the direction of hair growth and stick it back onto the protective film. Store cool and dry. Technical data ProductPromed TENS/EMS electrodes Ø 32 mm (self-adhesive) Size / shapeØ 32 mm, round Article number359177 Materialfabric carrier material with conductive hydrogel Connectorsnap connector 2 mm Pack size4 pcs Propertiesself-adhesive, reusable, for personal use CompatibilityPromed TENS-1000s, EMT-4, EMT-6, IT-6 as well as third-party devices with 2 mm snap Service lifetypically approx. 15–30 applications, depending on skin type, hair, care and storage Scope of delivery 4× Promed TENS/EMS electrode Ø 32 mm (round) 1× insert Cable not included (available separately) Care and safety informationPlease read the instructions for use of your TENS/EMS device carefully before first use. Never rinse the electrodes under running water – this destroys the hydrogel. If the adhesion weakens, it is enough to dab a single drop of water onto the adhesive surface. Alternatively, the Promed contact gel (Art. 359910) ensures better adhesion and conductivity. Do not place the electrodes over wounds, inflammation or irritated skin. Do not use in the area of the heart, larynx, eyes or over metal implants. Wearers of pacemakers or other electrical implants may only use TENS/EMS electrodes after consulting a doctor. In the case of pregnancy, epilepsy or unexplained pain, consult a doctor before use. With sensitive skin, carry out a skin-tolerance test on a small area before first use. Use for personal purposes only; after use, stick the electrodes back onto the protective film and store them cool and dry. Frequently asked questions (FAQ) What are the round 32 mm electrodes suitable for? The round Ø 32 mm (Art. 359177) are ideal for targeted application on small, precise points such as joints, trigger points or fingers. For smaller, elongated areas there are 45×35 mm (Art. 359172), for medium areas 45×45 mm (Art. 359171), for larger areas 45×80 mm (Art. 359178) as well as the butterfly (Art. 359173) and neck electrode (Art. 359174). Which devices are the electrodes compatible with? Thanks to the 2 mm snap connector, the electrodes fit all Promed electrotherapy devices: the TENS-1000s (Art. 352020), EMT-4 (Art. 352410), EMT-6 (Art. 352420) and IT-6 (Art. 352430). Many third-party devices with a 2 mm snap are also compatible – some third-party devices use a 2.5 mm pin, so check the connector type beforehand. The matching contact cables are available separately. How often can I reuse the electrodes? Depending on skin type, hair, care and storage, the electrodes typically last for approx. 15–30 applications. Replace the electrodes when the adhesion weakens, when discolouration or cracks appear, or when the gel surface dries out. How do I clean and store the electrodes correctly? Do not clean the electrodes themselves, but rather the area of skin before each application. Never rinse the adhesive surface under running water – if the adhesion weakens, a single drop of water is enough to refresh it. After use, stick the electrodes back onto the protective film and store them cool and dry. Can I use the electrodes with several people? No. For hygiene reasons, the fabric electrodes are for personal use and should be used by one person only. Are cables included in the scope of delivery? No, the contact cables are available separately – the matching Promed contact cable depending on your device. If the adhesion weakens, we additionally recommend the Promed contact gel (Art. 359910). Why Promed?For over 40 years, Promed has stood for premium products for manicure and pedicure as well as medical and wellness applications. Our devices and accessories are developed to strict quality standards, are tested and certified and are used worldwide by professionals and private customers – put your trust in Promed quality too. Order the Promed TENS/EMS electrodes Ø 32 mm now – for gentle, effective TENS/EMS application on small, targeted points.

Promed Fabric Electrodes 40×40 mm – Self-Adhesive TENS/EMS Replacement Pads (Pack of 4)The Promed Fabric Electrodes 40×40 mm are high-quality self-adhesive replacement pads for your TENS and EMS treatment. Sold in a convenient pack of 4 – ideal for pain therapy, muscle stimulation and rehabilitation. Skin-friendly, latex-free and compatible with all Promed TENS/EMS devices and many other units featuring the standard 2 mm pin connector. Key Benefits at a Glance Strong adhesion & long-lasting performance: High-quality hydrogel ensures secure grip and even current transfer – even after multiple uses. Skin-friendly & latex-free: Hypoallergenic material suitable for all skin types, including sensitive skin and allergy sufferers. Reusable: With proper care approximately 15–30 applications per electrode – saves money and reduces waste. Universal compatibility: Standard 2 mm pin connector – fits all common Promed TENS/EMS devices and many third-party units. Practical 40×40 mm size: Ideal for targeted application on smaller to medium muscle groups, trigger points or joint areas such as the back of the neck, shoulders, upper arms, wrists, thighs or calves. Convenient 4-pack: A complete set for one full treatment session – easy to reorder when adhesion weakens. Applications – What Are These Electrodes For?The Promed Fabric Electrodes 40×40 mm are designed for a wide range of TENS and EMS uses. Particularly recommended for: TENS pain therapy: Gentle pain relief for back, neck, shoulder or joint pain – drug-free and non-invasive. EMS muscle training: Targeted muscle building, relaxation and easing of tense muscles. Rehabilitation: Support recovery after injuries, surgery or muscle atrophy. Trigger-point treatment: Precise stimulation of small pain points thanks to the compact 40×40 mm size. Professionals and home users: Suitable for physiotherapy practices, rehab clinics and home use. How to Use – Step by Step Step 1 – Prepare the skin: Clean and fully dry the application area. For oily skin or cream residue, use a cotton pad with a little isopropyl alcohol – this significantly extends electrode life. Step 2 – Position the electrodes: Peel off the protective film and press the electrodes onto the desired skin area (over the painful area for TENS, on the muscle belly for EMS). Step 3 – Connect & treat: Plug the 2 mm pin connector into your TENS/EMS device and start treatment as instructed in the device manual. Step 4 – After use: Carefully unplug, slowly remove the electrodes from the skin and immediately stick them back onto the protective liner. Store in the resealable pouch in a cool, dry place. Technical Specifications Model / Item NumberPromed Fabric Electrodes 40×40 mm (359170) TypeSelf-adhesive fabric electrodes for TENS/EMS Size40 × 40 mm (square) Pack size4 pieces per set MaterialFabric backing with conductive hydrogel Connector2 mm pin connector (standard) PropertiesLatex-free, hypoallergenic, reusable CompatibilityPromed EMT-4, EMT-6, TENS 1000 S, digi tens 3000 and other TENS/EMS devices with 2 mm connector Recommended use cycleapprox. 15–30 applications per electrode (depending on skin type and care) What's Included 4× Promed Fabric Electrodes 40×40 mm, self-adhesive 1× resealable storage pouch Application and care instructions Care & Safety NotesPlease read the user manual of your TENS/EMS device carefully before first use. Never rinse the electrodes under running water or fully soak them – this damages the hydrogel and adhesive layer. If adhesion weakens: simply dab a single drop of water onto the gel surface and let it absorb briefly. Alternatively, the Promed Tensive Contact Gel can be used for even better adhesion and conductivity. After each use, immediately stick the electrodes back onto the protective liner and seal in the pouch. Store in a cool, dry place – ideally in the refrigerator to extend life and conductivity. Avoid direct sunlight and heat. Do not apply electrodes over wounds, inflammation or irritated skin. Do not use near the heart, throat, eyes or over metallic implants. Pacemaker patients or users with other electrical implants should only use TENS/EMS electrodes after consulting a doctor. Consult a doctor before use if pregnant, epileptic or experiencing unexplained pain. For sensitive skin we recommend a small skin compatibility test before first use. Frequently Asked Questions (FAQ) Which Promed devices are these electrodes compatible with? The electrodes are compatible with all common Promed TENS/EMS devices, including Promed EMT-4, Promed EMT-6, Promed TENS 1000 S and Promed digi tens 3000. Thanks to the standard 2 mm pin connector they also fit many third-party devices. How often can I reuse the electrodes? With proper care the Promed Fabric Electrodes typically last for 15–30 applications. Actual lifespan depends on your skin type (oily vs. dry), care routine and storage. Replace the electrodes once adhesion weakens noticeably or stimulation feels weaker or uncomfortable. How do I clean and store the electrodes correctly? Don't clean the electrodes themselves – clean the skin before each use. Skin oil and cream residue are best removed with a cotton pad and a little isopropyl alcohol – this significantly extends electrode lifespan. Never rinse the electrodes under running water; this destroys the hydrogel. After treatment, immediately stick them back onto the protective liner and store sealed in the pouch in a cool, dry place – ideally in the refrigerator. Are the electrodes suitable for sensitive skin or allergy sufferers? Yes. The Promed Fabric Electrodes are latex-free and hypoallergenic and therefore suitable for most skin types. For very sensitive skin or known skin allergies we recommend a small skin compatibility test on an inconspicuous area before first use. Where do I place the electrodes for TENS or EMS? For TENS pain therapy place the electrodes near the painful area – either directly over it or on either side. For EMS muscle stimulation place the electrodes on the muscle belly you want to train. Detailed placement recommendations can be found in the user manual of your Promed TENS/EMS device. What if the electrodes lose their grip? Dab a single drop of water onto the gel surface – do not rinse, just moisten lightly. This refreshes the hydrogel. For even better adhesion and conductivity we recommend Promed Tensive Contact Gel as an alternative. If adhesion remains weak or stimulation is uncomfortable, the electrodes are worn out and should be replaced. Fresh Promed replacement electrodes are available in the Promed shop under item number 359170. Can I use the electrodes with other manufacturers' devices? Yes, provided the device uses the standard 2 mm pin connector. This connector type is standard on most TENS/EMS devices. If in doubt, check your device specifications or contact our customer service. Which size do I need – 40×40 mm or larger? The compact 40×40 mm size is ideal for smaller to medium muscle groups, trigger points and joint areas like the back of the neck, shoulders, upper arms, wrists, thighs or calves. For larger treatment areas (e.g. back or back of the legs) we recommend larger electrodes from our range. Note: application in the face, throat or head area only after consultation with a doctor. Why Promed?For more than 40 years Promed has stood for high-quality products in manicure and pedicure as well as medical and wellness applications. Our devices and accessories are developed to strict quality standards, are tested and certified, and are used by professionals and private customers worldwide – trust Promed quality, too. Order your Promed Fabric Electrodes 40×40 mm now and ensure gentle, effective TENS/EMS therapy whenever you need it.

Promed TENS/EMS electrodes 45×45 mm – self-adhesive fabric electrodes for medium areasThe Promed TENS/EMS electrodes 45×45 mm are self-adhesive replacement and consumable electrodes for TENS and EMS application with all Promed electrotherapy devices. The square shape is the versatile standard size and is particularly suitable for medium body areas such as the back, shoulders or thighs. Thanks to their snap connector (2 mm), they fit the TENS-1000s, EMT-4, EMT-6 and IT-6 as well as many third-party devices with the same connector. Gentle on the skin, reusable and for personal use. Other sizes and shapes are available separately. Your benefits at a glance Suitable for all Promed TENS/EMS devices: 2 mm snap connector for the TENS-1000s, EMT-4, EMT-6 and IT-6. Versatile standard size: square 45×45 mm for medium areas such as the back, shoulders or thighs. 4 electrodes per pack: ideal for 2-channel operation (two pairs of electrodes). Reusable multiple times: depending on skin type, hair, care and storage typically approx. 15–30 applications, until adhesion and conductivity decline. Skin-friendly & hygienic: Self-adhesive fabric with conductive hydrogel, for personal use. Areas of use – what are the 45×45 mm electrodes suitable for?The Promed fabric electrodes are the consumable material for TENS and EMS electrostimulation. The electrodes are positioned so that the current frames the area to be treated: For TENS pain therapy: consumable material for drug-free TENS application with your Promed electrotherapy device (e.g. for back, shoulder or joint complaints). For EMS muscle stimulation: consumable material for EMS application with your Promed device (muscle stimulation and relaxation of tense muscles). Ideal for medium areas: the 45×45 mm are suitable for areas such as the back, thighs or buttocks. Other sizes & shapes: for smaller, targeted or large-area regions, separate sizes as well as butterfly and neck shapes are available. How easy it is to use Step 1 – Prepare the skin: Clean the area of skin thoroughly and dry it completely – no oil and no lotion. Step 2 – Apply the electrode: Peel off the protective film and press the electrode down from the centre outwards. Step 3 – Connect & treat: Connect the cable (available separately) to the electrode and the device, switch the device on and increase the intensity slowly. Step 4 – After use: Switch the device off, disconnect the cable, peel off the electrode in the direction of hair growth and stick it back onto the protective film. Store cool and dry. Technical data ProductPromed TENS/EMS electrodes 45×45 mm (self-adhesive) Size / shape45×45 mm, square Article number359171 Materialfabric carrier material with conductive hydrogel Connectorsnap connector 2 mm Pack size4 pcs Propertiesself-adhesive, reusable, for personal use CompatibilityPromed TENS-1000s, EMT-4, EMT-6, IT-6 as well as third-party devices with 2 mm snap Service lifetypically approx. 15–30 applications, depending on skin type, hair, care and storage Scope of delivery 4× Promed TENS/EMS electrode 45×45 mm 1× insert Cable not included (available separately) Care and safety informationPlease read the instructions for use of your TENS/EMS device carefully before first use. Never rinse the electrodes under running water – this destroys the hydrogel. If the adhesion weakens, it is enough to dab a single drop of water onto the adhesive surface. Alternatively, the Promed contact gel (Art. 359910) ensures better adhesion and conductivity. Do not place the electrodes over wounds, inflammation or irritated skin. Do not use in the area of the heart, larynx, eyes or over metal implants. Wearers of pacemakers or other electrical implants may only use TENS/EMS electrodes after consulting a doctor. In the case of pregnancy, epilepsy or unexplained pain, consult a doctor before use. With sensitive skin, carry out a skin-tolerance test on a small area before first use. Use for personal purposes only; after use, stick the electrodes back onto the protective film and store them cool and dry. Frequently asked questions (FAQ) What are the 45×45 mm electrodes suitable for? The square 45×45 mm (Art. 359171) are the versatile standard size for medium body areas such as the back, shoulders or thighs. For smaller, targeted areas there are, among others, 45×35 mm (Art. 359172) and round 32 mm electrodes (Art. 359177); for larger areas 45×80 mm (Art. 359178) as well as the butterfly (Art. 359173) and neck electrode (Art. 359174). Which devices are the electrodes compatible with? Thanks to the 2 mm snap connector, the electrodes fit all Promed electrotherapy devices: the TENS-1000s (Art. 352020), EMT-4 (Art. 352410), EMT-6 (Art. 352420) and IT-6 (Art. 352430). Many third-party devices with a 2 mm snap are also compatible – some third-party devices use a 2.5 mm pin, so check the connector type beforehand. The matching contact cables are available separately. How often can I reuse the electrodes? Depending on skin type, hair, care and storage, the electrodes typically last for approx. 15–30 applications. Replace the electrodes when the adhesion weakens, when discolouration or cracks appear, or when the gel surface dries out. How do I clean and store the electrodes correctly? Do not clean the electrodes themselves, but rather the area of skin before each application. Never rinse the adhesive surface under running water – if the adhesion weakens, a single drop of water is enough to refresh it. After use, stick the electrodes back onto the protective film and store them cool and dry. Can I use the electrodes with several people? No. For hygiene reasons, the fabric electrodes are for personal use and should be used by one person only. Are cables included in the scope of delivery? No, the contact cables are available separately – the matching Promed contact cable depending on your device. If the adhesion weakens, we additionally recommend the Promed contact gel (Art. 359910). Why Promed?For over 40 years, Promed has stood for premium products for manicure and pedicure as well as medical and wellness applications. Our devices and accessories are developed to strict quality standards, are tested and certified and are used worldwide by professionals and private customers – put your trust in Promed quality too. Order the Promed TENS/EMS electrodes 45×45 mm now – for gentle, effective TENS/EMS application in the versatile standard size.

Promed TENS/EMS electrodes 45×80 mm – large, self-adhesive fabric electrodesThe Promed TENS/EMS electrodes 45×80 mm are self-adhesive replacement and consumable electrodes in a large, elongated format for TENS and EMS application with all Promed electrotherapy devices. Thanks to their snap connector (2 mm), they fit the TENS-1000s, EMT-4, EMT-6 and IT-6 as well as many third-party devices with the same connector. The large-area format is particularly suited to larger or elongated areas such as the back or the thighs. Gentle on the skin, reusable and for personal use. Pack size: 4 pcs. Your benefits at a glance Large, elongated 45×80 mm format: ideal for larger and elongated areas such as the back or thighs. Suitable for all Promed TENS/EMS devices: 2 mm snap connector for the TENS-1000s, EMT-4, EMT-6 and IT-6. Practical pack of 4: pack size with 4 electrodes – enough for both channels and as a supply. Reusable multiple times: depending on skin type, hair, care and storage typically approx. 15–30 applications, until adhesion and conductivity decline. Skin-friendly & hygienic: Self-adhesive fabric with conductive hydrogel, for personal use. Part of a system: also available in smaller standard sizes as well as butterfly and neck shapes. Areas of use – what are the 45×80 mm electrodes suitable for?The Promed fabric electrodes are the consumable material for TENS and EMS electrostimulation. The electrodes are positioned so that the current frames the area to be treated – the large 45×80 mm format covers larger surfaces: For TENS pain therapy: consumable material for drug-free TENS application with your Promed electrotherapy device, especially for large-area back or thigh complaints. For EMS muscle stimulation: consumable material for EMS application with your Promed device, ideal for larger muscle groups. Larger and elongated areas: The large format frames larger areas in a single step. Other shapes: For targeted areas there are smaller standard sizes, and for anatomical applications the butterfly and neck electrodes. How easy it is to use Step 1 – Prepare the skin: Clean the area of skin thoroughly and dry it completely – no oil and no lotion. Step 2 – Apply the electrode: Peel off the protective film and press the electrode down from the centre outwards. Step 3 – Connect & treat: Connect the cable (available separately) to the electrode and the device, switch the device on and increase the intensity slowly. Step 4 – After use: Switch the device off, disconnect the cable, peel off the electrode in the direction of hair growth and stick it back onto the protective film. Store cool and dry. Technical data ProductPromed TENS/EMS electrodes 45×80 mm (self-adhesive) Shape / sizelarge, elongated – 45×80 mm Dimensions45×80 mm (approx. 4.5×8 cm) Article number359178 Materialfabric carrier material with conductive hydrogel Connectorsnap connector 2 mm Pack size4 pcs Propertiesself-adhesive, reusable, for personal use CompatibilityPromed TENS-1000s, EMT-4, EMT-6, IT-6 as well as third-party devices with 2 mm snap Service lifetypically approx. 15–30 applications, depending on skin type, hair, care and storage Scope of delivery 4× Promed TENS/EMS electrode 45×80 mm 1× insert Cable not included (available separately) Care and safety informationPlease read the instructions for use of your TENS/EMS device carefully before first use. Never rinse the electrodes under running water – this destroys the hydrogel. If the adhesion weakens, it is enough to dab a single drop of water onto the adhesive surface. Alternatively, the Promed contact gel (Art. 359910) ensures better adhesion and conductivity. Do not place the electrodes over wounds, inflammation or irritated skin. Do not use in the area of the heart, larynx, eyes or over metal implants. Wearers of pacemakers or other electrical implants may only use TENS/EMS electrodes after consulting a doctor. In the case of pregnancy, epilepsy or unexplained pain, consult a doctor before use. With sensitive skin, carry out a skin-tolerance test on a small area before first use. Use for personal purposes only; after use, stick the electrodes back onto the protective film and store them cool and dry. Frequently asked questions (FAQ) Which body regions is the 45×80 mm format suitable for? The large, elongated format is particularly suited to larger or elongated areas such as the large-area back or the thighs. For smaller, targeted areas there are the round 32 mm electrodes (Art. 359177) or 45×35 mm (Art. 359172) and 45×45 mm (Art. 359171). For large-area or anatomical applications, the butterfly electrode (Art. 359173) and the neck electrode (Art. 359174) are available. Which devices are the electrodes compatible with? Thanks to the 2 mm snap connector, the electrodes fit all Promed electrotherapy devices: the TENS-1000s (Art. 352020), EMT-4 (Art. 352410), EMT-6 (Art. 352420) and IT-6 (Art. 352430). Many third-party devices with a 2 mm snap are also compatible – some third-party devices use a 2.5 mm pin, so check the connector type beforehand. The matching contact cables are available separately. How often can I reuse the electrodes? Depending on skin type, hair, care and storage, the electrodes typically last for approx. 15–30 applications. Replace the electrodes when the adhesion weakens, when discolouration or cracks appear, or when the gel surface dries out. How do I clean and store the electrodes correctly? Do not clean the electrodes themselves, but rather the area of skin before each application. Never rinse the adhesive surface under running water – if the adhesion weakens, a single drop of water is enough to refresh it. After use, stick the electrodes back onto the protective film and store them cool and dry. Can I use the electrodes with several people? No. For hygiene reasons, the fabric electrodes are for personal use and should be used by one person only. Are cables included in the scope of delivery? No, the contact cables are available separately – the matching Promed contact cable depending on your device. If the adhesion weakens, we additionally recommend the Promed contact gel (Art. 359910). Why Promed?For over 40 years, Promed has stood for premium products for manicure and pedicure as well as medical and wellness applications. Our devices and accessories are developed to strict quality standards, are tested and certified and are used worldwide by professionals and private customers – put your trust in Promed quality too. Order the Promed TENS/EMS electrodes 45×80 mm now – for gentle, effective TENS/EMS application on large areas.

Promed TENS/EMS electrode neck 130×110 mm – anatomical fabric electrodeThe Promed TENS/EMS electrode neck (130×110 mm) is a self-adhesive replacement and consumable electrode in an anatomical neck/shoulder shape for TENS and EMS application with all Promed electrotherapy devices. Thanks to its snap connector (2 mm), it fits the TENS-1000s, EMT-4, EMT-6 and IT-6 as well as many third-party devices with the same connector. The anatomical shape (13×11 cm) fits precisely onto the neck and shoulders. Gentle on the skin, reusable and for personal use. Pack size: 1 pc. Your benefits at a glance Anatomical neck/shoulder shape 130×110 mm: precisely shaped for the neck and shoulders. Suitable for all Promed TENS/EMS devices: 2 mm snap connector for the TENS-1000s, EMT-4, EMT-6 and IT-6. One electrode for the neck region: covers the neck and shoulders in a single step – pack size 1 pc. Reusable multiple times: depending on skin type, hair, care and storage typically approx. 15–30 applications, until adhesion and conductivity decline. Skin-friendly & hygienic: Self-adhesive fabric with conductive hydrogel, for personal use. Part of a system: also available in several standard sizes as well as a butterfly shape. Areas of use – what is the neck electrode suitable for?The Promed fabric electrodes are the consumable material for TENS and EMS electrostimulation. The electrode is positioned so that the current frames the area to be treated – the anatomical neck shape covers the neck and shoulders precisely: For TENS pain therapy: consumable material for drug-free TENS application with your Promed electrotherapy device, especially for neck and shoulder complaints. For EMS muscle stimulation: consumable material for EMS application with your Promed device (muscle stimulation and relaxation of tense neck and shoulder muscles). Anatomical neck/shoulder application: The shape fits precisely onto the neck and shoulder area. Other shapes: For targeted or smaller areas there are the standard sizes, and for large-area regions the butterfly electrode. How easy it is to use Step 1 – Prepare the skin: Clean the area of skin thoroughly and dry it completely – no oil and no lotion. Step 2 – Apply the electrode: Peel off the protective film and press the electrode down from the centre outwards. Step 3 – Connect & treat: Connect the cable (available separately) to the electrode and the device, switch the device on and increase the intensity slowly. Step 4 – After use: Switch the device off, disconnect the cable, peel off the electrode in the direction of hair growth and stick it back onto the protective film. Store cool and dry. Technical data ProductPromed TENS/EMS electrode neck 130×110 mm (self-adhesive) Shape / sizeneck/shoulder, anatomically shaped Dimensions130×110 mm (13×11 cm) Article number359174 Materialfabric carrier material with conductive hydrogel Connectorsnap connector 2 mm Pack size1 pc Propertiesself-adhesive, reusable, for personal use CompatibilityPromed TENS-1000s, EMT-4, EMT-6, IT-6 as well as third-party devices with 2 mm snap Service lifetypically approx. 15–30 applications, depending on skin type, hair, care and storage Scope of delivery 1× Promed TENS/EMS electrode neck 130×110 mm (13×11 cm) 1× insert Cable not included (available separately) Care and safety informationPlease read the instructions for use of your TENS/EMS device carefully before first use. Never rinse the electrodes under running water – this destroys the hydrogel. If the adhesion weakens, it is enough to dab a single drop of water onto the adhesive surface. Alternatively, the Promed contact gel (Art. 359910) ensures better adhesion and conductivity. Do not place the electrodes over wounds, inflammation or irritated skin. Do not use in the area of the heart, larynx, eyes or over metal implants. Wearers of pacemakers or other electrical implants may only use TENS/EMS electrodes after consulting a doctor. In the case of pregnancy, epilepsy or unexplained pain, consult a doctor before use. With sensitive skin, carry out a skin-tolerance test on a small area before first use. Use for personal purposes only; after use, stick the electrodes back onto the protective film and store them cool and dry. Frequently asked questions (FAQ) Which body regions is the neck electrode suitable for? The anatomical neck shape (130×110 mm) is particularly suited to the neck and shoulders, onto which it fits precisely. For targeted or smaller areas there are the round 32 mm electrodes (Art. 359177), 45×35 mm (Art. 359172), 45×45 mm (Art. 359171) and 45×80 mm (Art. 359178). For large-area regions, the butterfly electrode (Art. 359173) is available. Which devices is the electrode compatible with? Thanks to the 2 mm snap connector, the electrode fits all Promed electrotherapy devices: the TENS-1000s (Art. 352020), EMT-4 (Art. 352410), EMT-6 (Art. 352420) and IT-6 (Art. 352430). Many third-party devices with a 2 mm snap are also compatible – some third-party devices use a 2.5 mm pin, so check the connector type beforehand. The matching contact cables are available separately. How often can I reuse the electrode? Depending on skin type, hair, care and storage, the electrodes typically last for approx. 15–30 applications. Replace the electrodes when the adhesion weakens, when discolouration or cracks appear, or when the gel surface dries out. How do I clean and store the electrode correctly? Do not clean the electrodes themselves, but rather the area of skin before each application. Never rinse the adhesive surface under running water – if the adhesion weakens, a single drop of water is enough to refresh it. After use, stick the electrodes back onto the protective film and store them cool and dry. Can I use the electrode with several people? No. For hygiene reasons, the fabric electrodes are for personal use and should be used by one person only. Are cables included in the scope of delivery? No, the contact cables are available separately – the matching Promed contact cable depending on your device. If the adhesion weakens, we additionally recommend the Promed contact gel (Art. 359910). Why Promed?For over 40 years, Promed has stood for premium products for manicure and pedicure as well as medical and wellness applications. Our devices and accessories are developed to strict quality standards, are tested and certified and are used worldwide by professionals and private customers – put your trust in Promed quality too. Order the Promed TENS/EMS electrode neck 130×110 mm now – for gentle, effective TENS/EMS application on the neck and shoulders.

Contact-gel for refresh the contact surfaces of the electrodes.50g tube

Vaginal probe for EMS treatment to the electric stimulation with urinary incontinence (women).This probe is built with alimentary suitable plastic material. To transversal ring electrodes from rustproof steel. This is characterized by low-cost, lightweight, comfortability; better impedance matching with vaginal tissues. The wave shape to be used for electrostimulation is the biphases symmetric (galvanic free).Size: 50 mm (length) x 20 mm (diameter)