Pulse Oximeters

Einfache Gesundheitskontrolle von ZuhauseDas Pulsoximeter PM 100 von medisana misst zuverlässig und präzise die Werte für die Blutsauerstoffsättigung und die Herzfrequenz. Beide Messwerte lassen sich auf dem gut ablesbaren OLED-Display in vier unterschiedlichen Ansichtsperspektiven in Balken- oder Wellenform darstellen. Nach acht Sekunden schaltet sich das Gerät automatisch wieder ab und schont dadurch die Batterien. Das ist nur einer der Vorzüge dieses Medizinprodukts aus dem Hause Medisana.Einfache One Touch-Bedienung ideal auch für unterwegsDas Pulsoximeter PM 100 ist nicht nur zu Hause ein praktischer Alltagsbegleiter, sondern auch auf Reisen. Ideal für unterwegs ist die praktische One Touch-Bedienung. Mit nur einem Knopfdruck starten Sie die Messung.Verbindung zur VitaDock+ AppDank der integrierten Bluetooth-Verbindung können Sie Ihre Aufzeichnungen problemlos an unsere VitaDock+ App senden. Dort werden sie gespeichert und können ausgewertet werden. Technische DatenGröße: ca. 5,8 x 3,4 x 3,5 cmGewicht: ca. 53 gMessbereich: SpO2: 70% ~ 100%Puls: 30 - 235 Schläge/Min.Batterien: 2 x 1,5 V (AAA)

Promed PM-200 Pro Fingertip Pulse Oximeter – SpO₂ and pulse in secondsThe Promed PM-200 Pro Fingertip Pulse Oximeter (art. 481010) non-invasively measures arterial oxygen saturation (SpO₂) and pulse rate at the finger – simply insert and read. The two-colour OLED display offers 4 display modes, and individually adjustable alarm limits provide an audible alert for abnormal readings. Thanks to battery operation, the device is ready for use at any time in the home, at school and in medical facilities. Your benefits at a glance Quick check: SpO₂ and pulse rate in just a few seconds – simply insert your finger. Precise measurement: SpO₂ accuracy of ±2 % in the 80–100 % range, pulse measurement from 30 to 254 beats per minute. Clear OLED display: Two-colour and high-contrast, with 4 selectable display modes. Adjustable alarm limits: Audible alert for readings outside the individually set limits. Portable use: Battery operation with over 6 hours of continuous runtime and automatic standby after 8 seconds without a signal. Areas of use – who is the PM-200 Pro for?The Promed PM-200 Pro is suitable for spot measurement of oxygen saturation and pulse rate. Particularly recommended for: Self-monitoring at home: Quick measurement of SpO₂ and pulse in your own household. Physically active people: Spot checking of readings before or after exertion. Schools and medical facilities: For quick, straightforward spot-check measurements. Anyone who values simple operation: Insert your finger and read the values directly on the OLED display.Note: The PM-200 Pro is not a continuous monitoring device and does not replace a medical diagnosis. Easy application Step 1 – Insert batteries: Insert 2× AAA batteries, observing the correct polarity. Step 2 – Insert finger: Insert your finger fully into the rubber opening with the fingernail facing up. Step 3 – Measure: Press the button or let the measurement start automatically depending on the version, and hold still during the measurement. Step 4 – Read the values: Read SpO₂ (%) and pulse rate (beats/min) on the OLED display; the display mode can be changed at the press of a button. After removing your finger, the device automatically switches to standby after 8 seconds. Technical data Model / article numberPromed PM-200 Pro (481010) Measurement parametersSpO₂ (oxygen saturation) and pulse rate (PR) SpO₂ measurement range70–100 %, accuracy ±2 % (80–100 %) or ±3 % (70–79 %) Pulse measurement range30–254 beats/min, accuracy ±1 (≤100/min) or ±2 (>100/min) DisplayOLED, two-colour, 4 display modes Alarm limitsSpO₂ and pulse individually adjustable (alarm tone deactivated at the factory) Power supply2× AAA 1.5 V alkaline, over 6 hours of continuous operation Auto standbyafter 8 seconds without a signal Dimensions59.4 × 33 × 31.2 mm Warranty24-month manufacturer's warranty from date of purchase Scope of delivery 1× Promed PM-200 Pro (main device with SpO₂ sensor) 1× lanyard 2× AAA batteries 1× instructions for use Care and safety instructionsPlease read the instructions for use carefully before first use. The PM-200 Pro does not replace a medical diagnosis – contact a doctor if you have abnormal readings. Painted, artificial or very light fingernails can distort the measurement result; always insert the finger with the nail facing up. Venous pulsations, strong movement during the measurement or bright ambient light can lead to inaccurate readings – hold still during the measurement. The device is not intended for continuous monitoring. Clean the rubber opening with medical alcohol before each use. Replace the batteries when the display shows a low reading and remove them from the device if not used for a longer period. Not a toy – keep away from children (small parts, lanyard). Frequently asked questions (FAQ) How accurate is the PM-200 Pro measurement? SpO₂ accuracy is ±2 % in the range of 80–100 % and ±3 % in the range of 70–79 %. Pulse measurement is accurate to ±1 up to 100 beats per minute and to ±2 above that. Movement, nail polish or strong ambient light can affect the measurement accuracy. Why does the device switch off by itself? This is normal: the PM-200 Pro automatically switches to standby as soon as no finger is inserted or no signal is detected for 8 seconds. This conserves the batteries. Are the alarm limits activated at the factory? No, the alarm and signal tone are deactivated at the factory. The limit values for SpO₂ and pulse rate can be individually set in the menu and then activated. Does nail polish affect the measurement? Yes, painted, artificial or very light fingernails can distort the measurement result. Always insert the finger fully into the rubber opening with the nail facing up. Which batteries does the device need? The PM-200 Pro runs on 2× AAA batteries (1.5 V alkaline), giving it a runtime of over 6 hours in continuous operation. Is the PM-200 Pro suitable for continuous monitoring? No. The device is intended for spot measurements of SpO₂ and pulse rate, not for continuous monitoring. It does not replace a medical diagnosis – contact a doctor if you have abnormal readings. Why Promed?For over 40 years, Promed has stood for high-quality products for manicure and pedicure as well as medical and wellness applications. Our devices and accessories are developed to strict quality standards, are tested and certified and are used worldwide by professionals and private customers – put your trust in Promed quality too. Order the Promed PM-200 Pro Fingertip Pulse Oximeter now and keep an eye on your readings at all times.

Promed PM-300 Pro – fingertip pulse oximeter with OLED display for SpO₂ and pulseThe Promed PM-300 Pro is a fingertip pulse oximeter for the quick measurement of blood oxygen saturation (SpO₂) and pulse rate. The high-contrast OLED display shows your readings including the pulse waveform in four display modes – with an acoustic and visual warning signal in case of abnormal readings. Weighing only approx. 35 g and operated with a single button. Your benefits at a glance High-contrast OLED display: easy to read from various angles, even in low light. SpO₂ & pulse in seconds: precise measurement with an accuracy of ±2 % (SpO₂) and ±3 beats/min (pulse). Pulse waveform display: a visual representation of the pulse wave in four display modes for a better overview. Warning signals: acoustic and visual indication in case of abnormal readings. Featherlight & easy to operate: only approx. 35 g, one-button operation and automatic switch-off after 8 seconds without a signal. Tool-free battery replacement: 2× AAA batteries, quickly swapped on the go. Areas of use – who is the PM-300 Pro suitable for?The Promed PM-300 Pro is suitable for the spot-check monitoring of SpO₂ and pulse under supervision – at home and in medical facilities: Adults for self-monitoring: simple self-measurement of oxygen saturation and pulse rate at home. Sport & endurance training: a quick check of readings before, during or after exercise. Altitude stays & travel: uncomplicated monitoring of oxygen saturation on the go. Medical facilities: a quick spot-check measurement as additional information in everyday practice or care. Using it is this easy Step 1 – Insert the batteries: insert 2× AAA batteries (type LR03) into the battery compartment with the correct polarity. Step 2 – Insert your finger: hold the device with the display facing you and insert your index, middle or ring finger all the way in. Step 3 – Start the measurement: press the function button – the reading appears after approx. 3 seconds. Keep your finger still until a stable value is shown after approx. 10 seconds. Step 4 – Read the value: read the SpO₂, pulse and pulse wave on the OLED display. After you remove your finger, the device switches off automatically after approx. 8 seconds. Technical data Model / article numberPromed PM-300 Pro (482020) DisplayOLED, 4 display modes, pulse waveform SpO₂ measuring range0–100 % (accuracy 70–100 %: ±2 %) Pulse measuring range25–250 beats/min (accuracy ±3 beats/min) Finger diameter8–25.4 mm (not for newborns/infants) Power supply2× AAA batteries, 1.5 V Protection ratingIP22 Applied partType BF Automatic switch-offafter 8 seconds without a signal Weightapprox. 35 g (without batteries) Warranty24 months from date of purchase Scope of delivery 1× Promed PM-300 Pro fingertip pulse oximeter 1× lanyard 2× AAA batteries 1× instruction manual Care and safety informationPlease read the instruction manual carefully before first use. The Promed PM-300 Pro does not replace a medical diagnosis – the readings serve as additional information and are not the sole basis for medical decisions. Not suitable for newborns and infants. Do not use for longer than 5 minutes on the same finger; do not use on swollen or sensitive skin. Do not apply to the same hand or arm as a blood pressure cuff. Do not use near flammable anaesthetics or in HF surgery or MRI environments. Do not place in liquids; do not look directly into the infrared light; do not open or modify the device. Keep small parts and the lanyard away from children (risk of choking). Cleaning: wipe with clear water or with ethanol (75 %) or isopropanol (70 %) – first switch off and remove the batteries; never immerse the device. Frequently asked questions (FAQ) What exactly does the Promed PM-300 Pro measure? The device measures functional arterial oxygen saturation (SpO₂) and the pulse rate at the fingertip. In addition, the OLED display shows the pulse wave. How accurate is the measurement? In the range of 70–100 %, the accuracy for SpO₂ is ±2 % and for the pulse rate ±3 beats/min. Below 70 % SpO₂, no accuracy is specified. Can I use the device on children or infants? No. The PM-300 Pro is not suitable for newborns and infants and is designed for a finger diameter of 8–25.4 mm. Does the pulse oximeter replace a medical examination? No. The Promed PM-300 Pro provides additional information for spot-check monitoring, but does not replace a medical diagnosis and should not be the sole basis for medical decisions. Which display modes does the PM-300 Pro offer? The OLED display offers four display modes and additionally shows the pulse wave. This lets you read SpO₂, pulse rate and pulse waveform clearly and choose the view according to your preference. How long does a measurement take? After inserting your finger and switching on, the reading appears after approx. 3 seconds and a stable value is available after approx. 10 seconds. Keep your finger still during the measurement. Which batteries does the device need? The PM-300 Pro requires 2× AAA batteries (type LR03, 1.5 V), which can be changed via the battery compartment without tools. Two batteries are included. How do I clean the pulse oximeter correctly? Switch off the device before cleaning and remove the batteries. Wipe the housing with clear water or with ethanol (75 %) or isopropanol (70 %). The device must never be immersed in liquid. Why Promed?For over 40 years, Promed has stood for high-quality products for manicure and pedicure as well as medical and wellness applications. Our devices and accessories are developed to strict quality standards, are tested and certified and are used worldwide by professionals and private customers alike – put your trust in Promed quality too. Order the Promed PM-300 Pro now and keep an eye on your SpO₂ and pulse readings at any time.