Abrasive Sets
Promed Callus Set (198010) – bits for foot care and calluses The Promed Callus Set is put together specifically for foot care. It bundles several bits for removing calluses, hard skin and firm nail edges on the feet, both over larger areas and in a targeted way. All bits have a shaft Ø 2.332–2.350 mm and fit all Promed nail drills with a 2.35 mm collet. Key features at a glance Focus: foot care – calluses, hard skin and firm nail edges. Contents: several bits for large-area removal and targeted edge work. Target group: users with pronounced calluses as well as foot care. Shaft: dental standard Ø 2.332–2.350 mm, suitable for all Promed devices with a standard collet. Cleaning: in an ultrasonic bath. Important: this set is expressly NOT autoclavable. What is the set used for and how?The Callus Set is suitable for regular foot care: Calluses & hard skin: remove over larger areas and with light pressure – never radically, but regularly in thin layers. Nail edges: carefully shape firm or thickened edges on the toenails. Tip: if heat builds up, reduce the speed and briefly lift off the bit. Technical data Article number198010 TypeSanding bit set, Callus (foot care) Application areaFoot care – calluses, hard skin, firm nail edges ShaftØ 2.332–2.350 mm (dental standard) Sterilisationnot autoclavable; ultrasonic cleaning Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe bits fit all Promed nail drills with a standard collet (2.35 mm), including the Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60); do not autoclave. Work with light pressure; never remove calluses radically. In case of diabetes or circulatory disorders, seek medical advice beforehand. Frequently asked questions (FAQ) Which devices does the set fit? All Promed nail drills with a standard collet (shaft Ø 2.35 mm). Can I autoclave the Callus Set? No. This set is expressly not autoclavable – clean the bits in an ultrasonic bath. What is the set intended for? For foot care – the targeted, regular removal of calluses, hard skin and firm nail edges. With the Promed Callus Set, you work on calluses and firm nail edges on the feet in a targeted and regular way.
Promed Polisher Set (198007) – polishers for a high-gloss finish on nails The Promed Polisher Set combines several polishers (bits) for the final step: smoothing and bringing the nail surface to a high gloss. The soft to medium polishing bits refine natural and artificial nails without removing too much material. All bits have a shank Ø 2.332–2.350 mm and fit all Promed nail drills with a 2.35 mm collet. Key features at a glance Type: polisher set for a high gloss and smooth surfaces. Contents: several polishing bits in various shapes and degrees of hardness. Application: finish and shine on natural and artificial nails. Target group: nail salons and home users for the perfect finishing touch. Shank: dental size Ø 2.332–2.350 mm, compatible with all Promed devices with a standard collet. Cleaning: in an ultrasonic bath; individual bits autoclavable depending on marking. What is the set used for and how?The Polisher Set is used at the end of the treatment: Smoothing: even out fine ridges and unevenness on the nail surface. High gloss: bring the surface to a natural shine without polish. Tip: work at low speed and with very little pressure to avoid heat. Technical data Article number198007 TypePolisher set (polishers) Area of applicationFinish and high gloss, natural and artificial nails ShankØ 2.332–2.350 mm (dental size) SterilisationUltrasonic cleaning; individual bits autoclavable depending on marking Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe bits fit all Promed nail drills with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions Clean in an ultrasonic bath after use (e.g. Promed UC-50 / UC-60). Only autoclave individual bits that are marked accordingly – observe the marking of the respective bit. Work with very little pressure and avoid heat generation. Frequently asked questions (FAQ) Which devices does the set fit? All Promed nail drills with a standard collet (shank Ø 2.35 mm). Are the polishers autoclavable? Depending on the bit. Please observe the marking of the individual bit; in general we recommend cleaning in an ultrasonic bath. Do I need additional polish for the shine? No. The polishers bring the nail surface to a natural high gloss – entirely without polish. With the Promed Polisher Set you give natural and artificial nails the perfect high-gloss finish.
Promed Set Basic (198005) – basic kit for manicure and pedicure The Promed Set Basic is the compact starter kit for nail and foot care. It brings together a well-chosen selection of bits for the most important steps in manicure and pedicure – ideal for getting started or as a foundation you can expand specifically later on. All bits have a shank Ø 2.332–2.350 mm and fit all Promed nail drills with a 2.35 mm collet. Key features at a glance Contents: balanced basic selection of bits for manicure and pedicure. Application: shortening, shaping and smoothing nails as well as light skin work. Target group: beginners and home users looking for a solid basic kit. Shank: dental size Ø 2.332–2.350 mm, compatible with all Promed devices with a standard collet. Cleaning: in an ultrasonic bath; individual bits autoclavable depending on marking. What is the set used for and how?Set Basic covers the everyday care steps: Nails: shorten, shape and smooth the edges. Skin: carefully work light calluses and firm edges. Tip: work at low to medium speed and with little pressure – particularly easy to control for beginners. Technical data Article number198005 TypeGrinding bit set, Basic Area of applicationManicure and pedicure (basic kit) ShankØ 2.332–2.350 mm (dental size) SterilisationUltrasonic cleaning; individual bits autoclavable depending on marking Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe bits fit all Promed nail drills with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions Clean in an ultrasonic bath after use (e.g. Promed UC-50 / UC-60). Only autoclave individual bits that are marked accordingly – observe the marking of the respective bit. Work with little pressure; in case of diabetes or circulatory disorders, seek medical advice beforehand. Frequently asked questions (FAQ) Which devices does the set fit? All Promed nail drills with a standard collet (shank Ø 2.35 mm). Are the bits autoclavable? Depending on the bit. Please observe the marking of the individual bit; in general we recommend cleaning in an ultrasonic bath. Is the set suitable for beginners? Yes. Set Basic is put together as a basic kit for beginners and home users in manicure and pedicure. With the Promed Set Basic you start manicure and pedicure with a solid basic kit.
Promed Set Master (198006) – comprehensive professional set for manicure and pedicure The Promed Set Master is the comprehensive professional selection for demanding nail and foot care. It combines a broad range of bits in various materials, shapes and grits – covering almost every step in manicure and pedicure. All bits have a shank Ø 2.332–2.350 mm and fit all Promed nail drills with a 2.35 mm collet. Key features at a glance Contents: broad range of bits in different materials, shapes and grits. Application: the complete spectrum from nail to skin work in manicure and pedicure. Target group: professionals, salons and ambitious users with high standards. Shank: dental size Ø 2.332–2.350 mm, compatible with all Promed devices with a standard collet. Cleaning: in an ultrasonic bath; individual bits autoclavable depending on marking. What is the set used for and how?Set Master covers the full range of professional care: Nails: shorten, shape, smooth and work the surface. Skin: specifically work calluses, hardened skin and firm nail edges. Detail work: work corners, edges and hard-to-reach areas. Tip: adjust the speed and bit to each step; work with little pressure. Technical data Article number198006 TypeGrinding bit set, Master Area of applicationManicure and pedicure (professional set) ShankØ 2.332–2.350 mm (dental size) SterilisationUltrasonic cleaning; individual bits autoclavable depending on marking Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe bits fit all Promed nail drills with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions Clean in an ultrasonic bath after use (e.g. Promed UC-50 / UC-60). Only autoclave individual bits that are marked accordingly – observe the marking of the respective bit. Work with little pressure; in case of diabetes or circulatory disorders, seek medical advice beforehand. Frequently asked questions (FAQ) Which devices does the set fit? All Promed nail drills with a standard collet (shank Ø 2.35 mm). Are the bits autoclavable? Depending on the bit. Please observe the marking of the individual bit; in general we recommend cleaning in an ultrasonic bath. Who is the set suitable for? For professionals, salons and ambitious users looking for a comprehensive set for almost every step. With the Promed Set Master you have the right bit to hand for every step in manicure and pedicure.
Promed Natural Set (198009) – gentle bits for the natural nail The Promed Natural Set is designed for the gentle care of the natural nail. It contains several fine bits for gently shortening, shaping and smoothing – without putting unnecessary strain on the nail. Ideal for anyone who values natural, well-groomed nails. All bits have a shaft Ø 2.332–2.350 mm and fit all Promed nail drills with a 2.35 mm collet. Key features at a glance Focus: gentle, careful treatment of the natural nail. Contents: several fine bits for shortening, shaping and smoothing. Application: natural nail care as well as light work on the cuticle and edges. Target group: users focused on natural, well-groomed nails. Shaft: dental standard Ø 2.332–2.350 mm, suitable for all Promed devices with a standard collet. Cleaning: in an ultrasonic bath; individual bits are autoclavable depending on their marking. What is the set used for and how?The Natural Set is suitable for regular, gentle nail care: Shortening & shaping: gently bring the natural nail to length and shape. Smoothing: finely work the edges and surface. Detail work: carefully care for the cuticle and edges. Tip: work at a low speed and with light pressure – especially gentle on the natural nail. Technical data Article number198009 TypeSanding bit set, Natural Application areaNatural nail care (gentle) ShaftØ 2.332–2.350 mm (dental standard) SterilisationUltrasonic cleaning; individual bits autoclavable depending on marking Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe bits fit all Promed nail drills with a standard collet (2.35 mm), including the Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60). Autoclave only bits marked accordingly – observe the marking of the respective bit. Work at a low speed and with light pressure; do not overstrain the natural nail. Frequently asked questions (FAQ) Which devices does the set fit? All Promed nail drills with a standard collet (shaft Ø 2.35 mm). Are the bits autoclavable? It depends on the bit. Please observe the marking of the individual bit; in general we recommend cleaning in an ultrasonic bath. Is the set suitable for artificial nails? The Natural Set is designed for the gentle care of the natural nail. For artificial nails, carbide or nitride sets are more suitable. With the Promed Natural Set, you care for the natural nail gently and keep it well-groomed in the long term.
Promed Personal Care Set (198014) – bits for nail and foot care at home The Promed Personal Care Set is the practical selection for nail and foot care in your own home. It bundles a clearly arranged choice of bits for the most important care steps on hands and feet – easy to use and ideal for home use. All bits have a shaft Ø 2.332–2.350 mm and fit all Promed nail drills with a 2.35 mm collet. Key features at a glance Focus: home use – nail and foot care for at home. Contents: a clearly arranged choice of bits for everyday care. Application: shortening and shaping nails as well as working on skin and light calluses. Target group: home users who want to care for their hands and feet themselves. Shaft: dental standard Ø 2.332–2.350 mm, suitable for all Promed devices with a standard collet. Cleaning: in an ultrasonic bath; individual bits are autoclavable depending on their marking. What is the set used for and how?The Personal Care Set covers everyday care at home: Nails: shorten, shape and smooth on hands and feet. Skin: carefully work on light calluses and firm edges. Tip: work at a low to medium speed and with light pressure – easy to control. Technical data Article number198014 TypeSanding bit set, Personal Care Application areaHome use – nail and foot care ShaftØ 2.332–2.350 mm (dental standard) SterilisationUltrasonic cleaning; individual bits autoclavable depending on marking Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe bits fit all Promed nail drills with a standard collet (2.35 mm), including the Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60). Autoclave only bits marked accordingly – observe the marking of the respective bit. Work with light pressure; in case of diabetes or circulatory disorders, seek medical advice beforehand. Frequently asked questions (FAQ) Which devices does the set fit? All Promed nail drills with a standard collet (shaft Ø 2.35 mm). Are the bits autoclavable? It depends on the bit. Please observe the marking of the individual bit; in general we recommend cleaning in an ultrasonic bath. Is the set suitable for beginners? Yes. The Personal Care Set is specially put together for easy nail and foot care at home. With the Promed Personal Care Set, you care for your hands and feet conveniently and easily at home.
Promed Comfort Bit Set (198016) – starter set for nail and foot care The Promed Comfort Bit Set is the convenient starter set for nail and foot care. It bundles a manageable choice of bits for the basic care steps – easy to understand and ideal for a comfortable start. All bits have a shaft Ø 2.332–2.350 mm and fit all Promed nail drills with a 2.35 mm collet. Key features at a glance Focus: starter set for convenient nail and foot care. Contents: a manageable choice of bits for the basic care steps. Application: shortening and shaping nails as well as working on skin and light calluses. Target group: beginners and home users who want to get started easily. Shaft: dental standard Ø 2.332–2.350 mm, suitable for all Promed devices with a standard collet. Cleaning: in an ultrasonic bath; individual bits are autoclavable depending on their marking. What is the set used for and how?The Comfort Bit Set covers the basic care steps: Nails: shorten, shape and smooth on hands and feet. Skin: carefully work on light calluses and firm edges. Tip: work at a low to medium speed and with light pressure – comfortable and easy to control. Technical data Article number198016 TypeComfort Bit Set (starter) Application areaNail and foot care (beginners) ShaftØ 2.332–2.350 mm (dental standard) SterilisationUltrasonic cleaning; individual bits autoclavable depending on marking Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe bits fit all Promed nail drills with a standard collet (2.35 mm), including the Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60). Autoclave only bits marked accordingly – observe the marking of the respective bit. Work with light pressure; in case of diabetes or circulatory disorders, seek medical advice beforehand. Frequently asked questions (FAQ) Which devices does the set fit? All Promed nail drills with a standard collet (shaft Ø 2.35 mm). Are the bits autoclavable? It depends on the bit. Please observe the marking of the individual bit; in general we recommend cleaning in an ultrasonic bath. Is the set suitable for beginners? Yes. The Comfort Bit Set is intended as a convenient starter set for basic nail and foot care. With the Promed Comfort Bit Set, you get started with your own nail and foot care in comfort.
Promed Grinding Bit Set Blue-Mix (198002) – aluminium nitride nail drill bits for nail extensions and artificial nails The Promed Grinding Bit Set Blue-Mix contains several drill bits with an aluminium nitride coating in the characteristic blue finish – tailored to nail extensions and artificial nails. The bits remove material quickly while keeping their sharpness. All bits have a shank Ø 2.332–2.350 mm and fit all Promed nail drills with a 2.35 mm collet. Key features at a glance Material: aluminium nitride coating – long service life, fast material removal. Contents: several bits in various shapes and grits (Blue-Mix). Application: nail extensions and artificial nails – shortening, shaping, blending. Target group: nail salon and nail extension professionals. Shank: dental size Ø 2.332–2.350 mm, compatible with all Promed devices with a standard collet. Cleaning: in an ultrasonic bath; individual bits autoclavable depending on marking. What is the set used for and how?The Blue-Mix is designed for the steps in artificial nail extension work: Material removal: efficiently shorten extension material and bring it into basic shape. Shaping: work the sides, edges and surface evenly. Blending: smoothly blend the transitions to the natural nail. Tip: work at medium speed and with little pressure; briefly lift the bit if it heats up. Technical data Article number198002 TypeGrinding bit set, Blue-Mix MaterialAluminium nitride coating Area of applicationNail extensions and artificial nails ShankØ 2.332–2.350 mm (dental size) SterilisationUltrasonic cleaning; individual bits autoclavable depending on marking Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe bits fit all Promed nail drills with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions Clean in an ultrasonic bath after use (e.g. Promed UC-50 / UC-60). Only autoclave individual bits that are marked accordingly – observe the marking of the respective bit. Work with little pressure; ensure an even movement. Frequently asked questions (FAQ) Which devices does the set fit? All Promed nail drills with a standard collet (shank Ø 2.35 mm). Are the bits autoclavable? Depending on the bit. Please observe the marking of the individual bit; in general we recommend cleaning in an ultrasonic bath. Who is the set suitable for? For nail salon and nail extension professionals who want to work on artificial nails efficiently and with a long service life. With the Promed Grinding Bit Set Blue-Mix you work fast and enduringly on nail extensions.
Promed Grinding Bit Set Ceramic (198001) – ceramic nail drill bits for artificial and natural nails The Promed Grinding Bit Set Ceramic combines several ceramic drill bits in one set – for shortening, shaping and blending artificial and natural nails. Ceramic works cleanly, generates little heat and does not clog up with dust. All bits have a shank Ø 2.332–2.350 mm and fit all Promed nail drills with a 2.35 mm collet. Key features at a glance Material: ceramic – durable, low-wear, low heat generation. Contents: several ceramic bits in different shapes and grits. Application: shortening, shaping and blending artificial and natural nails. Target group: nail salons, nail extensions and ambitious home use. Shank: dental size Ø 2.332–2.350 mm, compatible with all Promed devices with a standard collet. Cleaning: in an ultrasonic bath; individual bits autoclavable depending on marking. What is the set used for and how?The ceramic set covers the typical steps in nail extension work: Shortening & prep work: quickly bring artificial nail material to length and basic shape. Shaping: work the edges, sides and surface evenly. Blending: smoothly blend the transitions between the natural nail and the extension. Tip: work at medium speed and with little pressure; briefly lift the bit if it heats up. Technical data Article number198001 TypeGrinding bit set, ceramic MaterialCeramic Area of applicationArtificial and natural nails (nail extensions) ShankØ 2.332–2.350 mm (dental size) SterilisationUltrasonic cleaning; individual bits autoclavable depending on marking Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe bits fit all Promed nail drills with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions Clean in an ultrasonic bath after use (e.g. Promed UC-50 / UC-60). Only autoclave individual bits that are marked accordingly – observe the marking of the respective bit. Work with little pressure; ensure an even movement. Frequently asked questions (FAQ) Which devices does the set fit? All Promed nail drills with a standard collet (shank Ø 2.35 mm). Are the ceramic bits autoclavable? Depending on the bit. Please observe the marking of the individual bit; in general we recommend cleaning in an ultrasonic bath. Who is the set suitable for? For nail salons, nail extension work and ambitious home users who want to work on artificial and natural nails cleanly. With the Promed Grinding Bit Set Ceramic you work on artificial and natural nails cleanly, coolly and durably.
Promed Grinding Bit Set Rainbow (198003) – tungsten nitride nail drill bits for nail extensions and artificial nails The Promed Grinding Bit Set Rainbow brings together several drill bits with a tungsten nitride coating in a colourful rainbow finish – tailored to nail extensions and artificial nails. The coloured coating protects against wear and makes the bits easy to tell apart. All bits have a shank Ø 2.332–2.350 mm and fit all Promed nail drills with a 2.35 mm collet. Key features at a glance Material: tungsten nitride coating – very robust, long service life. Contents: several bits in different shapes and grits (rainbow finish). Application: nail extensions and artificial nails – shortening, shaping, blending. Target group: nail salon and nail extension professionals. Shank: dental size Ø 2.332–2.350 mm, compatible with all Promed devices with a standard collet. Cleaning: in an ultrasonic bath; individual bits autoclavable depending on marking. What is the set used for and how?The rainbow set covers the typical steps in artificial nail extension work: Material removal: quickly shorten extension material and bring it into basic shape. Shaping: work the sides, edges and surface evenly. Blending: smoothly blend the transitions to the natural nail. Tip: work at medium speed and with little pressure; briefly lift the bit if it heats up. Technical data Article number198003 TypeGrinding bit set, Rainbow MaterialTungsten nitride coating Area of applicationNail extensions and artificial nails ShankØ 2.332–2.350 mm (dental size) SterilisationUltrasonic cleaning; individual bits autoclavable depending on marking Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe bits fit all Promed nail drills with a standard collet (2.35 mm), including Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions Clean in an ultrasonic bath after use (e.g. Promed UC-50 / UC-60). Only autoclave individual bits that are marked accordingly – observe the marking of the respective bit. Work with little pressure; ensure an even movement. Frequently asked questions (FAQ) Which devices does the set fit? All Promed nail drills with a standard collet (shank Ø 2.35 mm). Are the bits autoclavable? Depending on the bit. Please observe the marking of the individual bit; in general we recommend cleaning in an ultrasonic bath. What does the rainbow finish stand for? The coloured tungsten nitride coating protects against wear and makes the individual bits in the set easy to tell apart. With the Promed Grinding Bit Set Rainbow you work on artificial nails robustly, durably and clearly.
Promed Carbide Bit Set Pro (198008) – carbide nail drill bits for gel/acrylic overlays and artificial nails The Promed Carbide Bit Set Pro combines several carbide drill bits for fast, precise work on gel/acrylic overlays and artificial nails. Carbide removes artificial nail material quickly, stays sharp for a long time and is ideal for intensive salon work. All bits have a shaft Ø 2.332–2.350 mm and fit all Promed nail drills with a 2.35 mm collet. Key features at a glance Material: carbide (HM) – very fast material removal, long service life. Contents: several carbide bits in various shapes and cuts. Application: gel/acrylic overlays and artificial nails – shortening, shaping, blending. Target group: nail salon and overlay professionals (pro set). Shaft: dental standard Ø 2.332–2.350 mm, suitable for all Promed devices with a standard collet. Cleaning: in an ultrasonic bath; individual bits are autoclavable depending on their marking. What is the set used for and how?The Carbide Bit Set Pro is designed for efficient artificial nail work: Material removal: quickly remove overlay material and excess. Shaping: precisely work the sides, edges and surface. Blending: cleanly blend the transition to the natural nail. Tip: choose the cut to suit the material; work with an even motion and light pressure. Technical data Article number198008 TypeCarbide Bit Set Pro (carbide) MaterialCarbide Application areaGel/acrylic overlays and artificial nails ShaftØ 2.332–2.350 mm (dental standard) SterilisationUltrasonic cleaning; individual bits autoclavable depending on marking Compatibilityall Promed devices with a 2.35 mm collet Compatible devicesThe bits fit all Promed nail drills with a standard collet (2.35 mm), including the Promed 1030, 2020, 3030-X, 4030-SX2, 4040, 5040-SX2, 525/625/725/825, Ultra Pro S as well as Emotion and sensitive. Care and safety instructions After use, clean in an ultrasonic bath (e.g. Promed UC-50 / UC-60). Autoclave only bits marked accordingly – observe the marking of the respective bit. Work with light pressure; choose the cut to suit the material. Frequently asked questions (FAQ) Which devices does the set fit? All Promed nail drills with a standard collet (shaft Ø 2.35 mm). Are the carbide bits autoclavable? It depends on the bit. Please observe the marking of the individual bit; in general we recommend cleaning in an ultrasonic bath. For natural or artificial nails? Primarily for artificial nails and overlays. Carbide removes artificial nail material particularly efficiently. With the Promed Carbide Bit Set Pro, you work on overlays and artificial nails quickly, precisely and durably.